Okay so this past weekend i began putting my twist throttle on my 02 blaster and for some reason now its not running right..do i need the idle kit or does anyone no what going on with this?
Okay so this past weekend i began putting my twist throttle on my 02 blaster and for some reason now its not running right..do i need the idle kit or does anyone no what going on with this?
you have to buy a tors removal kit with and idle install kit try vitos performance, there are ways to jerryrig it but i would not do it i would do it right
Thanks do you know if they are a hard install
i dont know i have never installed one but if you call vitos i am sure they will be able to tell you more and how hard they are to install
all i know is that my dad put one on my bike and they are very hard to get use to. i went into the turn and was really hard to get off the gas.
Dustin Rohan #85
Sold all the quads.. klx110 left
but i took it off the day after i had it. lol
Dustin Rohan #85
Sold all the quads.. klx110 left
if you have your tors removed make sure the little box up front under the nose its out too... theres a wire that runs from the stock throttle houseing and goes up there...
when you start it up if you twist the throttle will it stay runing, if its something with the tors it will die out when you let off the gas, get a vid of what it sounds/ runs like with it... hope that helped
Originally posted by BakerRacing40
bad thing is she's probably been rode harder than half the bikes in the start gate..
but you can still have fun with somethin that's a lil worn out...
RIP John Gallagher Sr
give him a blessing or two... god bless this rider and all fallin riders..
http://www.metalmulisha.com/team/jeremy-lusk
250r... the G.O.A.T of quads...