New Frames

[Andyman17dad]

I have a DRX 2 90 ltd. that is the older style with the shorter frame.
If I order a new frame, will I be able to just bolt ecverything from this one onto it, or did they change anything else??
This one is so tight in the front, by the upper a-arm bracket, that you can barely even get the spark plug out.
Just thought I would throw that out there for everyone to think about.
That also will lengthen the wheelbase, correct?? I have noticed that our Apex 70 is about 2inches longer wheel base than the DRX.

[bulldogfallon]

The swingarm is 2" longer on the newer quads

You can tell by looking at where the rear shock mounts...there is a support tube and the longer swingarms have 2 horizontal tubes for support.

The a-arm mounts may be different I believe (not 100% sure)

Getting the heads off where a problem so they altered the frame

[jetmedic]

Bob, I can guarantee you the upper "A" arms are different length and will not bolt on. You will induce too much camber in the front spindles if you use old arms.

[Andyman17dad]

That's what I was afraid of.