how do i build a kicker ramp for bikes?

[TC17]

me and my friend brian and goin to try to biuld a kicker ramp today. 2 or 3 feet high. any tips on how to build it or what to use? thanks.

[Derek]

WHy do you keep posting things about peddle bikes?

[TC17]

a lot of people on here like pedal bikes. i thought someone one here might know something about a kicker ramp. a couple of guys on here have made them and have dirtbikes.

[CHAUNCY]

i have a kicker ramp for my rc10gt (rc car)
i used some flimsy wood and a couple 2 by 4's and some plywood it works good but wouldnt support a bike
Its about 1 and a half feet high
I can get like 6 feet of air with the jump
Its sick

[DMC mx400ex]

I DID THIS IN A BOUT A MIN SO ASK QUESTION, THE RED DOTTED ONE IS A VIEW OF ONE OF THE SIDE PANELSAND THE RED DOTS ARE 2 BY 4'S THAT RUN ACROSE FROM THE LEFT SIDEBOARD TO THE LEFT, THEN THE TOP PIECE GOES ONTOP AND IS SCREWED DOWN ON THE 2BY4'S...

I dont no how it could be so hard...Just think up something..and makes sure it has alot of support...

[YamaWarr0121]

whatever you do make sure that you have a landing too
so you make a ramp like DMC showed you but then if its like 3 feet high ramp make the landing about 2 feet high or 1-1/2 to make much smoother landings, then u can keep extending it out more n get a lot of air...you can put something under neath the landing of plywood so when you land it doesnt go strait down n hit the ground
ill get some pics of my dirt jumps at my friends house 10 foot first one then 15 second one
there insane

[TC17]

thanks. i'm goin outside now to make and jump it. i'm goin to try to line up some 2 by 4's sideways and nail a semi-bendable but supportive board to that.

[mysticfalcon]

heres a jump im gonna build from 3 sheets of plywood

This is an awsome kicker...

After I sell my 400 i am goin back to motorcycles, gonna try a little freestyle and build me something like this...