What roller weights are you guys finding to be successful on your 2007 DRX's
Air and Water Cooled
What roller weights are you guys finding to be successful on your 2007 DRX's
Air and Water Cooled
90cc (6) 5.5grm 1500 springs big and little....mx track with short straightaways
07' drx 50 air cooled = 3.7
07' drx 90 air cooled = 4.8
I think I asked an open ended question...
The roller weight info will not be complete without knowing the rear spring rates as they will directly effect the roller weight needed .....and the type of track you are building for....short and tight or a long track where top end can be built up
If anyone answers please provide as much of this info as possible
I am sure not everyone wants to share their secrets, but it is interesting to see the variance of what everyone is using.
I know that some of the recomendations I have rec'd before this post as vastly different
Interesting......
Keep the input coming
liquid cooled 07 DRX2 W/O high compression head 21mm carb W/ stock air filter with mud shield removed.
Rollers 5.0
Rear 2000 springs and 1500 torq.
High compression head soon to come out will make a difference.
Thanks
Special thanks to 11-12 Sponsors
East Coast Performance