I personally thought it was the most fun and the best track on the circuit thus far in the season!
Who else thought that the track was a lot of fun?!
|
|
Member
I personally thought it was the most fun and the best track on the circuit thus far in the season!
Who else thought that the track was a lot of fun?!
Moderator
lol.
I think you was probably the only one that thought that .
hopefully next year the MX section will be much improved, if its held here again that is.
Generally this is a pretty cool place to ride and race and is quite abit different of pace than the rest of the tracks.The weatherthis time of year also can go either way and well.... ...It did both! LOL
Glad you had a great time!
I cant wait to see what Round 5 is all about !
http://qjsimaging.com/
-2002 Duncan 440ex-
Yoshimura full system,JE piston(12:1),Stage 2 Hot Cam,Port,polish, +3 Chrome Burgards AArms ,Elka Suspension -Triple rate front and Rear,GT Thunder Rev Box,,Pro Armour Nerfs,Burgard beadlock rears,Orange Fullbore,Chrome Tank cover,Candy Purple PC,Blingstar Dana Creech Bumper
2007 Suzuki LTR450
FOX Shocks, JB Racing A-Arms, Silver Maier plastic, Quad Tech Seat Cover, BRM Offroad race numbers
2008 Raptor 250 BUILD IN PROGRESS!
Thank you 2010 Sponsors
and Contributers!!
Teixeira Tech,DWT, Fasstco Co., Maxima oils, Scott USA, Renthal, ODI, FLY Racing,Western Powersports, Promoto Billet, FOX Shocks,Maier Plastics,ODI,Rath Racing,ATV4-play
ASV,Motoworks,QuadTech,Streamline,
RockyMountain ATV,Powermadd,Les Schwab,QJ's Imaging
450ER with a kicker
I agree. What size tire will you guys be running in the rear for round 5 since it is a mx track? 20 or 18?
Thanks to my 2008 sponsors:
Elka Suspension, IMS Products, RK Chains, ASV, Roll Design
06 450ER with a kicker
Sparks Ceramic Coated Big Core Exhuast
KN Air Filter
EHS Airbox Lid
Elka System 3
IMS-Roll Pro Series Nerf Bars
IMS-Roll Pro Series Foot Pegs
IMS-Roll Pro Series Heel Guards
IMS-Roll Intimidator Bumper
Hinson Racing Clutch Cover
AC Racing Rear Grab Bar
ProArmor Skid
Fasst Handlebars
Powermadd Handguards
Pro Design Kill Switch
Quadtech Carbon Fiber Hood w/scoop
Adapt Racing Graphics
ESR Temp Guage
ITP Holeshots All Around
2004 400ex:
WB e-series slip on (with no discs),Dyno Jet Kit,K&N air filter,K&N pre-filter,14 tooth front sprocket,Itp sand stars,CFM Aluminum Airbox w/lid,IMS Shifter,IMS Front Bumper, AC Racing Skid plate,AC Pro Peg Nerf Bars,AC Swingarm Skid Plate,Renthal 400ex Bend Handle bars,Pro Design Kill Switch,Denton Re-Buildable Steering Stabilizer,WB Shock covers,Rear 20"x11"x9" Holeshot Tires,Rear Burgard 9" Beadlock Wheels,Front ITP XCR 21"x7"x10",Front Douglas 10" Douglas Wheels
Junior Member
Just because there is a motorcross track doesnt mean there wont be a whole lot of off road course also.
450ER with a kicker
I know that, but I was thinking since it is a new course to the series it could be different.
Thanks to my 2008 sponsors:
Elka Suspension, IMS Products, RK Chains, ASV, Roll Design
06 450ER with a kicker
Sparks Ceramic Coated Big Core Exhuast
KN Air Filter
EHS Airbox Lid
Elka System 3
IMS-Roll Pro Series Nerf Bars
IMS-Roll Pro Series Foot Pegs
IMS-Roll Pro Series Heel Guards
IMS-Roll Intimidator Bumper
Hinson Racing Clutch Cover
AC Racing Rear Grab Bar
ProArmor Skid
Fasst Handlebars
Powermadd Handguards
Pro Design Kill Switch
Quadtech Carbon Fiber Hood w/scoop
Adapt Racing Graphics
ESR Temp Guage
ITP Holeshots All Around
2004 400ex:
WB e-series slip on (with no discs),Dyno Jet Kit,K&N air filter,K&N pre-filter,14 tooth front sprocket,Itp sand stars,CFM Aluminum Airbox w/lid,IMS Shifter,IMS Front Bumper, AC Racing Skid plate,AC Pro Peg Nerf Bars,AC Swingarm Skid Plate,Renthal 400ex Bend Handle bars,Pro Design Kill Switch,Denton Re-Buildable Steering Stabilizer,WB Shock covers,Rear 20"x11"x9" Holeshot Tires,Rear Burgard 9" Beadlock Wheels,Front ITP XCR 21"x7"x10",Front Douglas 10" Douglas Wheels
Ride HARD..Finish BIG
Nope, Basically every WORCS race, with the exception of Pismo, is based around a Motocross course. They always have an off-road loop. This track is no different, Sean would not take us to this track if it was only Motocross.
Run 20's, like you would for any WORCS race.
Chance Mayfield #171
Team Money$hot
Team ILBT2
2001 Cannondale FX470
2002 Cannondale Blaze 450
WORCS Open A/Pro-Am
2009 Sponsors:
S&S Motorsports, Blackwidow ATV, HiPer Technology, Amsoil, Fasst Company, ODI Grips, Powermadd, ASV Inventions, Regina USA, Four Racing, SixSixOne, ScottUSA, Gaerne Boots, Skorbordz, ProClean1000, RB Components, GoPro
Moderator
Some of the WORCS Coverage is now up.
Hanes, you most def. will want 20's like Cannondalerider mentioned. I wouldnt even consider an 18 .
My Husband tried that one time only and I dunno how he even finished!
http://qjsimaging.com/
-2002 Duncan 440ex-
Yoshimura full system,JE piston(12:1),Stage 2 Hot Cam,Port,polish, +3 Chrome Burgards AArms ,Elka Suspension -Triple rate front and Rear,GT Thunder Rev Box,,Pro Armour Nerfs,Burgard beadlock rears,Orange Fullbore,Chrome Tank cover,Candy Purple PC,Blingstar Dana Creech Bumper
2007 Suzuki LTR450
FOX Shocks, JB Racing A-Arms, Silver Maier plastic, Quad Tech Seat Cover, BRM Offroad race numbers
2008 Raptor 250 BUILD IN PROGRESS!
Thank you 2010 Sponsors
and Contributers!!
Teixeira Tech,DWT, Fasstco Co., Maxima oils, Scott USA, Renthal, ODI, FLY Racing,Western Powersports, Promoto Billet, FOX Shocks,Maier Plastics,ODI,Rath Racing,ATV4-play
ASV,Motoworks,QuadTech,Streamline,
RockyMountain ATV,Powermadd,Les Schwab,QJ's Imaging
450ER with a kicker
thank you
Thanks to my 2008 sponsors:
Elka Suspension, IMS Products, RK Chains, ASV, Roll Design
06 450ER with a kicker
Sparks Ceramic Coated Big Core Exhuast
KN Air Filter
EHS Airbox Lid
Elka System 3
IMS-Roll Pro Series Nerf Bars
IMS-Roll Pro Series Foot Pegs
IMS-Roll Pro Series Heel Guards
IMS-Roll Intimidator Bumper
Hinson Racing Clutch Cover
AC Racing Rear Grab Bar
ProArmor Skid
Fasst Handlebars
Powermadd Handguards
Pro Design Kill Switch
Quadtech Carbon Fiber Hood w/scoop
Adapt Racing Graphics
ESR Temp Guage
ITP Holeshots All Around
2004 400ex:
WB e-series slip on (with no discs),Dyno Jet Kit,K&N air filter,K&N pre-filter,14 tooth front sprocket,Itp sand stars,CFM Aluminum Airbox w/lid,IMS Shifter,IMS Front Bumper, AC Racing Skid plate,AC Pro Peg Nerf Bars,AC Swingarm Skid Plate,Renthal 400ex Bend Handle bars,Pro Design Kill Switch,Denton Re-Buildable Steering Stabilizer,WB Shock covers,Rear 20"x11"x9" Holeshot Tires,Rear Burgard 9" Beadlock Wheels,Front ITP XCR 21"x7"x10",Front Douglas 10" Douglas Wheels
Member
ya 20's are the only way to go in WORCS racing.....
being that it is by the coast im not expecting to have much DUST!
what do you think?
(wish i could wear a holeshot tearoff!)
450ER with a kicker
I think it could be windy because its by the coast and it being down south.
Thanks to my 2008 sponsors:
Elka Suspension, IMS Products, RK Chains, ASV, Roll Design
06 450ER with a kicker
Sparks Ceramic Coated Big Core Exhuast
KN Air Filter
EHS Airbox Lid
Elka System 3
IMS-Roll Pro Series Nerf Bars
IMS-Roll Pro Series Foot Pegs
IMS-Roll Pro Series Heel Guards
IMS-Roll Intimidator Bumper
Hinson Racing Clutch Cover
AC Racing Rear Grab Bar
ProArmor Skid
Fasst Handlebars
Powermadd Handguards
Pro Design Kill Switch
Quadtech Carbon Fiber Hood w/scoop
Adapt Racing Graphics
ESR Temp Guage
ITP Holeshots All Around
2004 400ex:
WB e-series slip on (with no discs),Dyno Jet Kit,K&N air filter,K&N pre-filter,14 tooth front sprocket,Itp sand stars,CFM Aluminum Airbox w/lid,IMS Shifter,IMS Front Bumper, AC Racing Skid plate,AC Pro Peg Nerf Bars,AC Swingarm Skid Plate,Renthal 400ex Bend Handle bars,Pro Design Kill Switch,Denton Re-Buildable Steering Stabilizer,WB Shock covers,Rear 20"x11"x9" Holeshot Tires,Rear Burgard 9" Beadlock Wheels,Front ITP XCR 21"x7"x10",Front Douglas 10" Douglas Wheels
Posting Permissions
Reply With Quote