i have a kasea 90. the motor has mild mods on it. it has a pe 20mm carb. if i got a koso or a lucky 7 intake with cage and reeds would i see a differance?
i have a kasea 90. the motor has mild mods on it. it has a pe 20mm carb. if i got a koso or a lucky 7 intake with cage and reeds would i see a differance?
CT Racing/IMS-ROLL YFZ-450 (Red)
Duncan Racing/IMS-ROLL YFZ-450 (Blue)
If you have an expansion chambered pipe... yes, you should see a difference.
Rule of thumb is: You have to be able to get the flow out of the motor, before you can put more flow into it. Now you might be able to see a little difference with a stock pipe, but only if the intake/reed assy is really restrictive.
Thanks:
ProCaliber Motorsports
myspace-X~Stream Composites
facebook-X-Stream Composites
G-Kid Motorsports
ya its got a pipe on it....
CT Racing/IMS-ROLL YFZ-450 (Red)
Duncan Racing/IMS-ROLL YFZ-450 (Blue)
Run the KOSO intake with intake stuffers to get the most power.
Special thanks to 11-12 Sponsors
East Coast Performance
With only a 20mm on a 90 I wouldn't mess with trying to restrict the flow with the stuffers. You said you have some mods and a pipe and most folks are running a 24mm at that point so you need all you can get out of the 20mm.
Brandon Waltz #11
Big thanks to Tittle Brothers Racing, RC Motorsports, RK Chains, SixSixOne and WeaponMX.
Brandon's Sponsorhouse