Hello. I have an lt80 (2001) that had low compression. I have removed the piston and cylinder and it’s in the shop being reworked. The piston was heavily worn, with deep gouges thru out. The shop could not say it was lack of oil (the injector could have run dry at one point and it overheated-I was not the original owner). They recommend disabling the injector pump (kit runs $35.00) and running pre-mix. This certainly guarantees no oil problems in the future. My question is; they recommend a ratio of 32:1 (5oz of oil to 1.25 gallons of gas). Does this seem reasonable for this bike? There are no specs for this on the bike that I am aware of. The last thing I want to do is damage a new top end rebuild. Thanks in advance.
..Matt