Results 1 to 7 of 7

Thread: forman350 not runing right!

  1. #1
    Join Date
    Jul 2006
    Location
    north central US
    Posts
    4,305

    forman350 not runing right!

    ok fellas, i got a freiend with a forman 350 its a 87 and it just pops when you start it and if you hit the gas it kills, im thinkin it the pet cock becuase the ltrs you have to chage and i think that this one has to be changed now since its a all the OME stuff and i t has a fuel pump and he replaced the filter so i dont know what it is, it runs like the choke is on wide open all the time but its not and we have cleaned the carb, and thoughts or ideas would greatly help me,
    thanks!
    Originally posted by BakerRacing40
    bad thing is she's probably been rode harder than half the bikes in the start gate..

    but you can still have fun with somethin that's a lil worn out...

    RIP John Gallagher Sr

    give him a blessing or two... god bless this rider and all fallin riders..
    http://www.metalmulisha.com/team/jeremy-lusk

    250r... the G.O.A.T of quads...

  2. #2
    Join Date
    Apr 2004
    Location
    hallstead pa
    Posts
    487
    are you shure the choke is off? i have seen the plunger lookin thing sieze in were the choke is. and be careful when you put it back in cuz it doesnt like to go in i had to sand the one on my rancher

  3. #3
    Join Date
    Jul 2006
    Location
    north central US
    Posts
    4,305
    im pretty sure i have the choke off, it just idles really low and if you hit the gas it dies, and adjusting the idol screw doesnt do any thing from what i've ben told, its my buddys.

    thanks!
    i'll talk to him about it and see that every thing was takein apart and the carb was put to gether the right way.
    thanks any one els?
    Originally posted by BakerRacing40
    bad thing is she's probably been rode harder than half the bikes in the start gate..

    but you can still have fun with somethin that's a lil worn out...

    RIP John Gallagher Sr

    give him a blessing or two... god bless this rider and all fallin riders..
    http://www.metalmulisha.com/team/jeremy-lusk

    250r... the G.O.A.T of quads...

  4. #4
    Join Date
    Apr 2004
    Location
    hallstead pa
    Posts
    487
    also if the air filter is blocked it will run rich. but id bet on the choke didnt go all the in theres a rubber o ring on the plunger and it sticks thats what happened to mine

  5. #5
    Join Date
    Jul 2006
    Location
    north central US
    Posts
    4,305
    ok, i dont really know whats the plunger. i havent worked on a forman carb, its my buddys do any of you have your carb apart can you post pics? thanks!
    Originally posted by BakerRacing40
    bad thing is she's probably been rode harder than half the bikes in the start gate..

    but you can still have fun with somethin that's a lil worn out...

    RIP John Gallagher Sr

    give him a blessing or two... god bless this rider and all fallin riders..
    http://www.metalmulisha.com/team/jeremy-lusk

    250r... the G.O.A.T of quads...

  6. #6
    Join Date
    Apr 2004
    Location
    hallstead pa
    Posts
    487
    if your sitting on the atv its on the left side it has a plastic screw in top on it and a cable going inside it should be the only other cable besides the throttle cable on the carb unnscrew the plastic top and pull it out should be attached to the cableheres a pic of the carb exploded view its number 9 or go here
    http://houseofmotorcycles.bikebandit...RAX+4X4%29.asp
    Attached Images Attached Images

  7. #7
    Join Date
    Jul 2006
    Location
    north central US
    Posts
    4,305
    ok thanks!
    i'll let you know if it works!
    Originally posted by BakerRacing40
    bad thing is she's probably been rode harder than half the bikes in the start gate..

    but you can still have fun with somethin that's a lil worn out...

    RIP John Gallagher Sr

    give him a blessing or two... god bless this rider and all fallin riders..
    http://www.metalmulisha.com/team/jeremy-lusk

    250r... the G.O.A.T of quads...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •