Results 1 to 4 of 4

Thread: hello?

  1. #1
    Join Date
    Jul 2006
    Location
    Sarnia, Ontario
    Posts
    6

    hello?

    obviously i must have been speaking in ojibway in my last thread cause nobody wanted to help me out! so let me break it in simple terms..... how can i fine tune my rejetted carb on my 05 trx 500 foreman ? i put at dyno jet kit with a k/n filter on it .... dyno jet said to have to fuel screw 2.5 turns out... and i suspect it is kind of running rich

    peace

  2. #2
    Join Date
    Jan 2007
    Location
    VA
    Posts
    15
    Well this acn get complicated with altitude and what not I am not a carb expert but DJ's settings should be fairly close to running good and why do u suspect it is running rich?
    02' 400EX- (WOODY)TJ graphics and Seat cover- BIGGUN ignition- HMF full- K&N air & oil filter& jets- RENTHAL bars & grips- ITP holeshot XCR- PRM skidplates all- NGK plug- SOLD

  3. #3
    Join Date
    Jul 2006
    Location
    Sarnia, Ontario
    Posts
    6

    yo

    i suspect it is running a little too rich because it sometimes has trouble idleing properly, especially after i have gave it throttle. she seems to be kinda smokey when she is running... ive noticed a bit of black carbon on the exhaust.....if it is running too rich i can adjust it from the fuel screw correct??

    peace

  4. #4
    Join Date
    Jan 2007
    Location
    VA
    Posts
    15
    have you tried the fuel screw yet
    02' 400EX- (WOODY)TJ graphics and Seat cover- BIGGUN ignition- HMF full- K&N air & oil filter& jets- RENTHAL bars & grips- ITP holeshot XCR- PRM skidplates all- NGK plug- SOLD

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •