Results 1 to 8 of 8

Thread: 06' Raptor 700 w/ 15 Shot

  1. #1
    Join Date
    Sep 2004
    Location
    Virginia
    Posts
    665

    06' Raptor 700 w/ 15 Shot

    Here is a bike that I did in Tenn. It is a 06 Raptor 700. This guy had a 15 shot of NOS. Yes we did run the NOS Mods were:

    GYTR Full Exhaust
    GYTR Filter No lid
    Trinity TFI...This TFI is a pain to Tune..
    NOS 15 Shot
    Wet system
    Fuel pump
    Dyno Slicks

    Temp was 81.5 °F

    Humidity was 27 %
    Attached Images Attached Images
    Precision Motorsports
    Mobile Dyno Services
    www.precision-ms.com
    ------------------------------

    My 440ex Mods: 12:5 Comp, White Bros. XC Cam, DRG Ported Head, DRG EXR Prototype Filter, Airbox Lid Off, 450r Carb, LRD Pro 4 Ballistic Full Exhaust...
    *Jetting: 3 turns out on the Mixture Screw, 48 pilot, Needle in the 3rd from top, and a DJ 170main*
    -----------------------------------------------
    Up to 42hp-30tq and For Sale*** Time for a new project!!

  2. #2
    Join Date
    Sep 2004
    Location
    Virginia
    Posts
    665
    Attached Images Attached Images
    Precision Motorsports
    Mobile Dyno Services
    www.precision-ms.com
    ------------------------------

    My 440ex Mods: 12:5 Comp, White Bros. XC Cam, DRG Ported Head, DRG EXR Prototype Filter, Airbox Lid Off, 450r Carb, LRD Pro 4 Ballistic Full Exhaust...
    *Jetting: 3 turns out on the Mixture Screw, 48 pilot, Needle in the 3rd from top, and a DJ 170main*
    -----------------------------------------------
    Up to 42hp-30tq and For Sale*** Time for a new project!!

  3. #3
    Join Date
    Sep 2004
    Location
    Virginia
    Posts
    665
    Hp Graph
    Attached Images Attached Images
    Precision Motorsports
    Mobile Dyno Services
    www.precision-ms.com
    ------------------------------

    My 440ex Mods: 12:5 Comp, White Bros. XC Cam, DRG Ported Head, DRG EXR Prototype Filter, Airbox Lid Off, 450r Carb, LRD Pro 4 Ballistic Full Exhaust...
    *Jetting: 3 turns out on the Mixture Screw, 48 pilot, Needle in the 3rd from top, and a DJ 170main*
    -----------------------------------------------
    Up to 42hp-30tq and For Sale*** Time for a new project!!

  4. #4
    Join Date
    Sep 2004
    Location
    Virginia
    Posts
    665
    Tq Graph Got every bit of that bottle....
    Attached Images Attached Images
    Precision Motorsports
    Mobile Dyno Services
    www.precision-ms.com
    ------------------------------

    My 440ex Mods: 12:5 Comp, White Bros. XC Cam, DRG Ported Head, DRG EXR Prototype Filter, Airbox Lid Off, 450r Carb, LRD Pro 4 Ballistic Full Exhaust...
    *Jetting: 3 turns out on the Mixture Screw, 48 pilot, Needle in the 3rd from top, and a DJ 170main*
    -----------------------------------------------
    Up to 42hp-30tq and For Sale*** Time for a new project!!

  5. #5
    Join Date
    Jul 2006
    Posts
    115
    Now thats a quad that can pull your arms off....man at the torque! It took about 5 pulls for me to get mine in the ball park, what kind of A/F did you shoot for N/A. Mine seemed to have the best torque and HP with 12.6-13.0
    13:1 105mm CP
    Ported head
    Monster Duals
    Texas Quad intake
    PCIII
    Extreme Fabrication nerfs
    MSR CR High Bend bars
    2.5" extended stock stem
    ASV levers
    15t/36T Renthal sprocket
    Gusseted frame
    Gforce axle
    Full Flight A-arms
    Holeshot MXR6 tires
    68rwhp/55rwtq on knobbies

  6. #6
    Join Date
    Sep 2004
    Location
    Virginia
    Posts
    665
    Same on this one. I kept it some alittle rich because of running NOS. I will look at the A/F graph and post.
    Precision Motorsports
    Mobile Dyno Services
    www.precision-ms.com
    ------------------------------

    My 440ex Mods: 12:5 Comp, White Bros. XC Cam, DRG Ported Head, DRG EXR Prototype Filter, Airbox Lid Off, 450r Carb, LRD Pro 4 Ballistic Full Exhaust...
    *Jetting: 3 turns out on the Mixture Screw, 48 pilot, Needle in the 3rd from top, and a DJ 170main*
    -----------------------------------------------
    Up to 42hp-30tq and For Sale*** Time for a new project!!

  7. #7
    Join Date
    Jan 2006
    Location
    Cave Creek, AZ
    Posts
    398
    LMFAO... That's some serious torque! I can only imagine what 63 lb-ft feels like. Holy shnikey!

    Even the n/a motor is a runner. Makes me rethink buying a 450 over the 700.

    Do you have any runs on a cammed 700 - maybe the HC 1???
    Chuck
    '06 Venom Performance Modified TRX511ER
    61.57 hp and 37.96 tq

  8. #8
    Join Date
    Dec 2006
    Location
    Henderson, NC
    Posts
    58
    That makes me love my 700 even more. I can only dream of what that torque feels like.
    2006 700R
    SPARKS BIG CORE EXHAUST
    PCIII
    SPARKS RACING AIR FILTER
    15T PRIMARY DRIVE SPROCKET
    GYT-R SKIDS

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •