Can someone tell me if an axle from a 400ex or a 250R will fit a 300EX. There are a lot more used aftermarket axles for these quads listed for sale than ones for a 300EX?
THANKS
Can someone tell me if an axle from a 400ex or a 250R will fit a 300EX. There are a lot more used aftermarket axles for these quads listed for sale than ones for a 300EX?
THANKS
over the hill, getting my thrills through watching my boys race
Sponsors: Arens Brothers Racing, Cobra, Badger Motorsports, Janssen Motorsports
a 400 will fit but you have to make a spacer. on the lock nut side there is slack. i used an old bearing carrier bearing and grinded it to the right width.
Mark
" A good friend will bail you out of jail but a true friend will be sitting beside you saying.... Dang that was fun"
Mark
Bubba ( son )
2005 YFZ450, 08 motor,Bike cam, Laeger Plus 2 a-arms, Elka shocks, GYTR Exhaust, Holeshots on Baja rims, AC Pro Pegs, G- Force axle
2009 Sponsor: Asv, SixSixOne. Oneal Racing, Houser Racing, GT Thunder, Nacs Racing, Elka
Or you can get a Rad locknut. They are much wider and can be turned down much farther to take up the slack, instead of making a spacer.
2004 400EX, currently in full teardown waiting for gusset kit to arrive.
Working on a custom Banshee with a CBR 1100XX blackbird engine.
ASE Master certified automobile technician. American Honda registered service technician.
i have a rad lock nut and still had to make a spacer.
Mark
" A good friend will bail you out of jail but a true friend will be sitting beside you saying.... Dang that was fun"
Mark
Bubba ( son )
2005 YFZ450, 08 motor,Bike cam, Laeger Plus 2 a-arms, Elka shocks, GYTR Exhaust, Holeshots on Baja rims, AC Pro Pegs, G- Force axle
2009 Sponsor: Asv, SixSixOne. Oneal Racing, Houser Racing, GT Thunder, Nacs Racing, Elka