so i just got a banshee and the idle is a bit to low, i am preaty sure the screw i need to ajust is the one on the side of the carb with the locking nut, but i dont wanna change any of the jetting so, is that the screw that ajust the idle?
do you have the tors still???? if so the adjustment is on the top of the tors the two knobs you will see them if u take the seat off.....if you dont the idle screws are on the sides they are gold and they do have a nut to hold htem secure them on the carbs....loosen the nut and turn the screw in about a half a turn or whatever u want it ot idle at.....(turn screw in idle up OUT idles down