got a problem with a banshee!

[redracing88]

i picked it up friday night got it home took it for a short ride ran fine. i went to put my moose throttle on it and cut the safty wires to the stock throttle and then tied them together like i did my blaster. i started it up and it ran fine. so then i was monkeying around with other stuff go to start it up like 15 mins later no spark. well i hit the cdi in the back a few times and it fired up. then it would run shut off after like 5 mins run shut off now theres nothing no spark or anything. could someone help me out here?

['02 Banshee]

i just unplugged mine u dont have to tie the ends together but the whole cdi thing might be a whole different problem

[bansheexcracer2]

on mine and a couple others i know the keys switches went bad. Try all else befor replacing the cdi. it is about 500 for a stock on or 350 for a aftermarket.

['02 Banshee]

yeah i didnt think of that right away...on that most ppl just delete the keyswitch....you do have the tie ends together on that.....there are 4 wires and two tie into each other...along witht the other two....not sure on the colors though

[bansheexcracer2]

The solid black one to the red with black strip one. I didnt hook up the other 2.