What are the next bolt on goodies to get. I was thinking about a good quality rev box (which one?) or a good aftermarket or larger carb. Thanks for any input.
Sparks X-6
Twin Air
Mod lid
Scoops
450r shocks
Tether
|
|
Still Got it & Get'n It
What are the next bolt on goodies to get. I was thinking about a good quality rev box (which one?) or a good aftermarket or larger carb. Thanks for any input.
Sparks X-6
Twin Air
Mod lid
Scoops
450r shocks
Tether
05 400ex (w/reverse!)
Sparks X-6
UM Scoops
Uni
450r shocks
Chevy Duramax
86 LT250r
HOT wife w/250ex
3x little boys that can ride!
lt80
lt50
KFX80
CRF230F
XR70
Registered User
With an internally stock engine, a rev box won't gain anything, except a lighter wallet. The stock engine's power tapers off well before the stock rev limiter, let alone one that is higher.
Either a new carb, or a high comp. piston and cam. Or both.
2000-440ex Stroker--Fan Cooled
Houser +1 A-Arms, Elka Triple rates, Laegers +1 1/4 Swingarm, G-Force Axle w/Durablue Anti-Fade Locknut, 14/36 Gearing, DID X-Ring Chain, C&D Revalved Rear, Maier Silver Plastic, Steel Grey PCed Frame, SPAL Fan, AC Bumper, Pro Armour Footpeg Extensions, Renthal Bars, Yoshimura Full Exhaust, 450R Carb w/ZR's Adaptor, K&N w/o Lid, Powroll 440 Stroker w/stg 3 HC, P&P Head, HD rod, GT Thunder HD Studs, and Timing chain, AMR Monster Coil, 4 Degree Advance Key and a 12oz lighter flywheel. Now at 12.5:1 Compression!
450R Front brake upgrade using 06-up Spindles and 07' hubs.
450R Rear Brake Upgrade
Kenda Knarly XC Radial 21x11x9 Rear Tires
Shorai Lithium Iron Battery
Running E85--Jetting: 70 pilot, 240 main, HRC needle on bottom notch and shimmed.
Paul
suspension, nerfs, bumber, handle bar, hood, theres a couple things
Junior Member
You guys keep forgetting the best bolt on there is.... NOS!
Paul
Ill passOriginally posted by mudmann
You guys keep forgetting the best bolt on there is.... NOS!
Posting Permissions
Reply With Quote