My son has grown like crazy lately. He crashed his quad saturday and bent his handle bars. I am looking for a high bend bar what is the best? He has a 04 Kasea 90.
My son has grown like crazy lately. He crashed his quad saturday and bent his handle bars. I am looking for a high bend bar what is the best? He has a 04 Kasea 90.
Jerry
Quadless again!!!!
The "best" would prolly be the fast flexx system but the drawback is they're $300.
Brandon Waltz #11
Big thanks to Tittle Brothers Racing, RC Motorsports, RK Chains, SixSixOne and WeaponMX.
Brandon's Sponsorhouse
Pro Taper has a high along with a mid ATV bar. Both of my daughters have them on their mini's along with having them on their full size quads.
Although our rider prefers the Low Bend FatBar for his Kasea, Renthal does have a nice Carmicheal high bend.
Our fatbar low bend runs width 31.41" Height 3.15" pull back is 2.24"
The carmichel high bend width 31.57" Height 4.49" pull back is 2.13"
they also have the CR High Bend which runs 31.29 (h) 3.74" (PB)2.44"
They run 69.99 you can get them straight from Rethal or order them from RockyMountainATV.com
Hope that helps. Gotta give the sponsors a plug ya know!
Sponsors:PROUD TO BE SPONSORED BY: TCS (Total Control Suspension)VPE/ProClean1000 /RK Chain/ RB Components/Renthal/Tekbolt/Scott/
ToolShed/Action Photos/Carbon Fiber Works
www.webspawner.com/users/manimalx
hi dad!
2006 300ex,Lonestar +2's,TCS Shocks,JB Racing Shock Relocator,Lonestar Axle, Holeshot tires on Douglas 190's,Tusk nerfs,Sparks x4,Uni filter, Renthal bars,ASV clutch Lever
Jerry,
Kelsey runs the FLY bars ,they have a nice mini High bend to them .plus she runs a small Riser... In time, Ill be adding longer Brake lines so she can run the ROX Riser plus she has a modified seat .All these should work nicely for him to add some much neede hieght
Kelsey just bent her bars wrecking at the WORCS race last week, so she now is sporting the sotck Honda 450 bars and they look GOOD!
http://i.pbase.com/o4/26/660826/1/60045287.IMG_2407.JPG
http://i.pbase.com/o4/26/660826/1/60045286.IMG_2408.JPG
http://qjsimaging.com/
-2002 Duncan 440ex-
Yoshimura full system,JE piston(12:1),Stage 2 Hot Cam,Port,polish, +3 Chrome Burgards AArms ,Elka Suspension -Triple rate front and Rear,GT Thunder Rev Box,,Pro Armour Nerfs,Burgard beadlock rears,Orange Fullbore,Chrome Tank cover,Candy Purple PC,Blingstar Dana Creech Bumper
2007 Suzuki LTR450
FOX Shocks, JB Racing A-Arms, Silver Maier plastic, Quad Tech Seat Cover, BRM Offroad race numbers
2008 Raptor 250 BUILD IN PROGRESS!
Thank you 2010 Sponsors
and Contributers!!
Teixeira Tech,DWT, Fasstco Co., Maxima oils, Scott USA, Renthal, ODI, FLY Racing,Western Powersports, Promoto Billet, FOX Shocks,Maier Plastics,ODI,Rath Racing,ATV4-play
ASV,Motoworks,QuadTech,Streamline,
RockyMountain ATV,Powermadd,Les Schwab,QJ's Imaging
try it again...
http://qjsimaging.com/
-2002 Duncan 440ex-
Yoshimura full system,JE piston(12:1),Stage 2 Hot Cam,Port,polish, +3 Chrome Burgards AArms ,Elka Suspension -Triple rate front and Rear,GT Thunder Rev Box,,Pro Armour Nerfs,Burgard beadlock rears,Orange Fullbore,Chrome Tank cover,Candy Purple PC,Blingstar Dana Creech Bumper
2007 Suzuki LTR450
FOX Shocks, JB Racing A-Arms, Silver Maier plastic, Quad Tech Seat Cover, BRM Offroad race numbers
2008 Raptor 250 BUILD IN PROGRESS!
Thank you 2010 Sponsors
and Contributers!!
Teixeira Tech,DWT, Fasstco Co., Maxima oils, Scott USA, Renthal, ODI, FLY Racing,Western Powersports, Promoto Billet, FOX Shocks,Maier Plastics,ODI,Rath Racing,ATV4-play
ASV,Motoworks,QuadTech,Streamline,
RockyMountain ATV,Powermadd,Les Schwab,QJ's Imaging
I know someone will aks this so Ill tell ya now..
The reason we have the back number on backwards was because we flipped it over for Nationals Number
http://qjsimaging.com/
-2002 Duncan 440ex-
Yoshimura full system,JE piston(12:1),Stage 2 Hot Cam,Port,polish, +3 Chrome Burgards AArms ,Elka Suspension -Triple rate front and Rear,GT Thunder Rev Box,,Pro Armour Nerfs,Burgard beadlock rears,Orange Fullbore,Chrome Tank cover,Candy Purple PC,Blingstar Dana Creech Bumper
2007 Suzuki LTR450
FOX Shocks, JB Racing A-Arms, Silver Maier plastic, Quad Tech Seat Cover, BRM Offroad race numbers
2008 Raptor 250 BUILD IN PROGRESS!
Thank you 2010 Sponsors
and Contributers!!
Teixeira Tech,DWT, Fasstco Co., Maxima oils, Scott USA, Renthal, ODI, FLY Racing,Western Powersports, Promoto Billet, FOX Shocks,Maier Plastics,ODI,Rath Racing,ATV4-play
ASV,Motoworks,QuadTech,Streamline,
RockyMountain ATV,Powermadd,Les Schwab,QJ's Imaging
Originally posted by QuadJunkies
Jerry,
Kelsey runs the FLY bars ,they have a nice mini High bend to them .plus she runs a small Riser... In time, Ill be adding longer Brake lines so she can run the ROX Riser plus she has a modified seat .All these should work nicely for him to add some much neede hieght
Kelsey just bent her bars wrecking at the WORCS race last week, so she now is sporting the sotck Honda 450 bars and they look GOOD!
http://i.pbase.com/o4/26/660826/1/60045287.IMG_2407.JPG
http://i.pbase.com/o4/26/660826/1/60045286.IMG_2408.JPG
Hey Tina it's Jerry on Justin's screen name. I bought him a pair of MSR handle bars and they look just like the 450r bend but he didn't like them.
2006 300ex,Lonestar +2's,TCS Shocks,JB Racing Shock Relocator,Lonestar Axle, Holeshot tires on Douglas 190's,Tusk nerfs,Sparks x4,Uni filter, Renthal bars,ASV clutch Lever
Originally posted by QuadRider55
hi dad!
Hey Bud
Jerry
Quadless again!!!!