Results 1 to 10 of 40

Thread: How to remove and replace front wheel bearings

Threaded View

  1. #1
    Join Date
    May 2002
    Location
    Who the hell knows
    Posts
    65,589

    How to remove and replace front wheel bearings

    One area that scares alot of atv owners is replacement of these items. It is a simple job that most everyone can do without spending big dollars on equipment. I will state that I prefer to use a shop press, but as long as you take your time and use the correct size tools you will have no problems at all.


    Once the hub has been removed from the spindle, you will need to remove the 2 small thrust washers located on each side of the hub. These can be lifted out with your finger.
    Attached Images Attached Images
    Staff Photographer ATVRiders.com
    Senior Photographer ATVInsider
    Staff Photographer GNCC Racing/ATV MX
    Staff Photographer Vurboffroad
    Staff Photographer Cycle News

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •