Sand setup??

[spudss]

I need to know what front sprocket I need to buy.. Is it the z400 sprocket (13 tooth)??? I have 20" Haulers.. I just dont know what sprocket to get.. Since they dont have them out for the LTR..(dealers 06 book) So my parts guy cant look up the LTR parts yet.. Any other info on sand set up would be great aswell..

[spudss]

Also I have a set of ITP T9 rims.. Does anyone have aftermarket wheels that they are running there sand tires on?? If so what are you useing (bolt wise) to fasten the wheels on.. Because the stock nuts are tapered to were you cant turn them around and have the flat part touch the rim.. What are you doing or did you buy a different style nut???

[Speed_MDS2]

Take a stock lugnut to a hardware store and find a bolt that threads into it. Then use the size and pitch off that bolt to find some stainless bolts and some washers for it. Regular washers, not lock washers. Oh, and the z400 front sprocket fits.

[baker58]

ya the sprocket for the 400z and the ltr 450 are the same they both interchange with each other

[spudss]

Cool Thanks for the info...

[quadfam4]

I used honda lug bolts backwards with washers.

[05kfx400]

The studs are M10 X1.25. I used flanged nuts from the hardware store. Like $5 to do all 4 wheels.