I need to know where to start with jetting on this.
I purchased this bike and it just runs like crap on the lowend
Things I do know: PJ 35mm keihin with 168 main jet.
Things I dont know:
The pilot jet has no number, and there is nothing on the needle to identify it.
The bike has no low end and it spits and spudders in first and second gear. When you hit third and you get the rpms up the bike runs fast and has enough power to lift the front tires off the ground in 3rd - 6th. in 4 and 5th if your not careful it will try and flip you over backwards in the powerband.
the motor is bored out to a 370 and has t-5's. The needle is on its leanest setting and seems to be too rich. I didnt do plug chops because the motor is still new just finishing up the second tank of gas.
It fouls plugs.
Now I didnt check the air screw setting.
I think that the needle is part of the problem but I am not sure what needles I should be looking at. Maybe a cel or eel?
I should get a new pilot so I know what pilot is in there and then I would be able to tell where to go from there.
I am unsure of what I should be getting. Any help would be greatly appreciated.
I posted at every other banshee site and trinity site and have gotten no responces.
I would appreciate any help given here.
Thanks,
Adam