Honda Civic Intake on the Preddy!

[wolffie]

people on the predatorowners.com forum have been doing this for awhile! it is a great mod! the acceleration is mind blowing, as is the throttle response! mods to the airbox will need to be done, and depending on your quad, the civic tube will have to be cut.

i am currently at a 180mj, 50pj, and the 4rth slot down on the needle(i also put an HMF pipe on as well)! and she halls balls! i will probably have to up a tooth on my front sprocket because i basically lost 1rst and 2nd gear (it revvs so FAST)

i dont have acces to a dyno, but i can deffinetly say the acceleration is absolutely amazing! the front end will come up at will pretty much through any gear

heres a bunch of pics! if anyone has any questions, ask away!!


-----Wolffie

[wolffie]

2

[wolffie]

"bling"

[wolffie]

.

[wolffie]

i took out riding after a day of rain, so the trails were somewhat muddy. i had no problems with debri getting in the airbox, but when i washed my quad afterwards i made sure to put a garbage bag over the filters. i would deffinetly reccomend getting an outerwears as well for dusty conditions! rather than that, no complaints here!

[Notfast3nuf4m3]

would that mod of the intake work on a 500 scrambler?

[wolffie]

yeah this mod will pretty much work on anything. it depends on how far away your stock filter and box setup is from the carb. you would just have to cut the tube to fit!

the longer the tube, the more low end
the shorter the tube, the more top end


its going to pull hard all through the midrange anyways!

[Notfast3nuf4m3]

whatd brand intake is it?

[wolffie]

im not entirely sure. i bought it off of a member of www.predatorowners.com. i believe it is off of an early 90's Civic though. honestly though, if you can get some metal tubing you could just make your own! then buy a clamp on filter at an autoparts store or www.denniskirk.com

[EXevan91]

think u could do it prity easy to a ex ?