Results 1 to 2 of 2

Thread: LT80 Moded cylinder Compression

  1. #1
    Join Date
    Jul 2004
    Location
    PA, USA
    Posts
    595

    LT80 Moded cylinder Compression

    All you guys running Moore LT80 engines, what kind of cylinder pressure are you at? We just burnt a hole in the piston this past weekend. I just got it back together and am at 180 cylinder pressure. I was running 93 octane. I talked to Jack and he said we may need to run Race fule in it. What are you guys running? a 50/50 mix of race and pump or straight race fuel? Also What octain race fuel you mixing or using?
    That's RACIN!
    Todd
    Swain Racing
    My Sponsor House Profile
    GNCC
    6 Hours of ATV America IRON MAN Class
    12 Hours of ATV America 30+ Class
    District 6 Vet Class

    2007 Sponsors - Teixeira Technologies, REKLUSE, Cardio Stack, Swain Racing, ELKA, BERRELL's FUEL OIL, Duncan Motorsports, ALL-PRO West, ODI Grips, CYCRA Racing, Tire Balls, Hiper Technology, Scott USA
    05 TRX450R

  2. #2
    Join Date
    Nov 2003
    Location
    shamokin pa
    Posts
    58

    fuel

    we ran pump gas in our jack moore motor no problems we only had 160 comp tho not sure why yours is higher .sure you don't have a leak some were sucking in air we never burned a piston allways wiped the rings from water tho.hope this helps

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •