YFZ450 XC Houser complete Long travel front and rear end with Elka Elite shocks

[414tinner]

I have a full front and rear Houser Long travel XC (Blue) setup.

On the front it is +1/2" long travel a arms (the newer style that uses the stock yamaha ball joints). The Elka Elite shocks have hi and low speed compression and rebound adjust. Set up for 190lb XC pro level.

The rear is a round house swing arm and Houser linkage and Elka Elite with hi and low compression and rebound adjust.

I also have a +1" steer stem with adjustable steer stops bottom.

I was looking to get $3000 shipped for everything or I can give seperate prices. I will also include front and rear stainless brake lines with this package. The rear shock and linkage needs to stay together though.

This is all used for one year and shocks were serviced by Elka in August and have only 2 full races on them since then. I replaced the swing arm pivot bearing, linkage bearings and a arm bearings at the same time also.

These shocks alone retail for $2700 all together from elka. You can call them and ask prices.

[Deak]

Will you sell just the shocks?If so how much? How long are they hole center to hole center?Thanks, Deak

[414tinner]

Front Quad Rate shocks $1000.00 shipped

I will have to get back on the length. I have to take them off. These retail for $1700.00. These are top of the line Quad Rate Elkas.



Rear shock with linkage for $850.00 shipped.

Retail is $1000.00 for the shock and $350.00 for the linkage



A-arms for $525.00 shipped

Retail for $800.00



Swing arm w/round house carrier for 550.00 shipped (New bearings in carrier and swing arm pivot)

Retail for 800.00



Steer stem for 220.00 shipped. Comes with big bar clamp and adjustable steer stops bottom.

Retail for $350.00 with all this.

I have pictures of all of these components on the bike I can email to anyone interested. Thanks

[414tinner]

The front shocks measure 18 1/2" center of top mount to center of botton mount.

The rear shock and linkage can be used on a stock swing arm and will fit 04-06 YFZ450.