Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: need help with eton 90

  1. #1
    Join Date
    Sep 2005
    Posts
    9

    need help with eton 90

    i have a eton thunder 90 atv. i am not getting any fire to the plug. i checked the key switch, the kill switch. I changed the spark plug, coil, stator generator, and the cdi box. I checked for broke wires. I dont know what else to do? Is there a wrong way to replace the stator/generator? Please help. thank you

  2. #2
    Join Date
    Dec 2003
    Location
    Texas
    Posts
    694
    Check the ground?
    http://www.wrhracing.net/home

  3. #3
    Join Date
    Sep 2005
    Posts
    9
    do you know which ground it might be? the starter turns the motor over. i found a ground wire that looks to be cut off by the starter relay but there is no sign of it ever being hooked up before.

    does anyone have a wire diagram for this bike.

  4. #4
    Join Date
    Dec 2003
    Location
    Texas
    Posts
    694
    Have one for the Eton Viper.
    http://www.wrhracing.net/home

  5. #5
    Join Date
    Aug 2003
    Location
    Marysville, Wa.
    Posts
    524
    Does the Eton have a tether type kill switch. ON my son's Predator 90, I spent two days trying to determine why I was not getting a spark. It ended up being a bad tether switch. I unplugged the two and taped them together, then I got spark. I ordered a new one but wish I would have went with a Pro Design. Hope this helps....

  6. #6
    Join Date
    Sep 2005
    Posts
    9
    when i put the ohm meter on it it checks good. maybe i should bypass it and try it that way just to see.

  7. #7
    Join Date
    Aug 2003
    Location
    Marysville, Wa.
    Posts
    524
    Let us know what you find when you try to bypass it...

  8. #8
    Join Date
    Jan 2004
    Location
    Southern Ohio
    Posts
    388
    I am having the same problem!
    Did you figure anything out?
    Humboldt Hills Racing Team;
    634 - Trenner Wile
    101 - Aubrey Wile
    925 - Tristan Garrett
    00 - Kamren Bobb
    21 - Wyatt Wilkin

    www.humboldthills.com
    www.soccracing.com
    www.southernohioscoring.com
    www.southerohiooffroad.com

  9. #9
    Join Date
    Sep 2005
    Posts
    9
    no, it still dont fire. i have changed the coil, cdi box, stator generator, spark plug, checked all my switches and i checked all my grounds that i could find. so i am stumped. i think i am going to sell it for parts.

  10. #10
    Join Date
    Jan 2004
    Location
    Southern Ohio
    Posts
    388
    Hooked mine up to an ohm meter today and found out the new stator I received was defective.
    Humboldt Hills Racing Team;
    634 - Trenner Wile
    101 - Aubrey Wile
    925 - Tristan Garrett
    00 - Kamren Bobb
    21 - Wyatt Wilkin

    www.humboldthills.com
    www.soccracing.com
    www.southernohioscoring.com
    www.southerohiooffroad.com

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •