Results 1 to 4 of 4

Thread: bad day good beat an rm125

  1. #1
    Join Date
    Apr 2002
    Location
    Massachusetts
    Posts
    825

    bad day good beat an rm125

    guys, today at the pit i was riden my 400ex hit a whoop wrong and was bucked off machine dide 4 flips in the air and two on the ground so after it was all said and done my friend on his rm 125 whitch landed on the quad could not believe the crash so i flipped the quad up whitch was up sidee down and did a visual inspection only this that broke were the electronics on the handle bars and the clutch lever . there was only enough clutche for one finger to hold so i was bummed out while i saw my friends ridin havin a good time. bout an hour later i was feelin good so i challenged the rm to a race, picked out a course bout a half mile 'round and started i pulled ahead and stayed there the entire tim until the 20th lap where i won because my friend was so tired he could not pull the clutch lever in, so i won it and he was mad because his piped and suspensionized mx ready rm125 was beeten by a 400ex(my bike) with only 1/4 of a clutch lever left on it
    i was feelin good :blah :devil
    #126
    00' 440ex with all the mx mods.
    LSR, PEP, burguards, durablue, itp, wiseco, AC racing, douglas.

    sponsors for 2004:
    cycle pros racing
    marcums motorsports

  2. #2
    Guest
    ok tahts kinda odd!!! Hope u and the quad end up alright. I dont see how u beat a tricked out rm. But ok at least you had a good end to the day!
    killer

  3. #3
    Join Date
    Apr 2002
    Location
    Massachusetts
    Posts
    825
    no im serious about the race there was a long hill climb that the four stroke acceled on. and thanks i am ok from the crash but beetin the rm made my day
    #126
    00' 440ex with all the mx mods.
    LSR, PEP, burguards, durablue, itp, wiseco, AC racing, douglas.

    sponsors for 2004:
    cycle pros racing
    marcums motorsports

  4. #4
    Join Date
    Oct 2001
    Location
    N.J.
    Posts
    4,403
    that why hand gaurds are the best thing for a bike or motorcycle, they protect your levers and strengthen the bars

    enjoy your win though!
    Atv Riders Photo Journalist and Atv riders atv specialist
    Ride:
    Laeger flip top protrax, Axis LT Shocks, Dominator +4 race axle , BWR 330 motor,Keihn 39mm pwk, 178 main, 52 pilot, DGH needle middle clip, Curtis Sparks TT Pipe& Silencer,CFM aluminum airbox, K&N Filter, 98 CR250 Boysen Rad Valve (rad 02b) W/spacer plate,Ricky Stator 200watt,Ricky Stator Rectifier, Ricky Stator Lightened Flywheel,Ricky Stator Billet Lights 200watt, Amsoil Dominator and C12 @ 50:1
    soon to have a B+B 320cc ktm rod stroker.

    ad me on facebook


    BWR part out all parts for sale!

    http://www.exriders.com/vbb/showthre...0&pagenumber=4

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •