Results 1 to 10 of 10

Thread: CDI question and jetting too

  1. #1
    Join Date
    Sep 2005
    Location
    michigan
    Posts
    10

    CDI question and jetting too

    Will a 04 cdi box work the same in a 02? All the plug in's look the same. I just bought a 02 raptor and the cdi box is bad. I can get one out of a 04 cheap or free from a buddy. Also it has a fmf header, yoush pipe and a k&n with a open lid. The jets are 160 and 155. Think that is big enough?
    Thanks for any help.
    Jeff

  2. #2
    Join Date
    Apr 2005
    Location
    south carolina
    Posts
    1,999
    yes the cdi will work, but what are you asking about the air box and the exhaust??
    http://pg.photos.yahoo.com/ph/tater_kamik/my_photos

    http://www.myspace.com/tater_kamik

  3. #3
    Join Date
    Sep 2005
    Location
    michigan
    Posts
    10
    Wondering if the jets in the raptor are big enough too. I was thinking that they are too small??

  4. #4
    Join Date
    Dec 2004
    Location
    new jersey
    Posts
    42

    i run 165/170 jets

    my airbox lid has two holes in it. If you have the lid off you might want to go a little richer
    02 raptor
    +2+1 wicked a arms
    +2+5 RPM Dominator axle
    K&N air filter
    GYTR Jet kit 165/170
    Yoshimura TRS Titanium full pipe
    AC pro peg nerfs w/ heelguards
    Renthal 12/42 sprockets
    Maxxis Razr mx's 20"front 18"rears

  5. #5
    Join Date
    Dec 2004
    Location
    new jersey
    Posts
    42

    jetting

    bluetraxx has some very good info on that subject
    02 raptor
    +2+1 wicked a arms
    +2+5 RPM Dominator axle
    K&N air filter
    GYTR Jet kit 165/170
    Yoshimura TRS Titanium full pipe
    AC pro peg nerfs w/ heelguards
    Renthal 12/42 sprockets
    Maxxis Razr mx's 20"front 18"rears

  6. #6
    Join Date
    Sep 2005
    Location
    michigan
    Posts
    10
    Thanks guys. I got it running great. But today I went to ride it and and I push the button to start it and the starter just spins. I think it might be the one way bearing?? I wonder if they are hard to replace.
    Jeff

  7. #7
    Join Date
    Feb 2005
    Posts
    258
    02 and 04 cdi boxes have different part numbers, so no guarantee they will work the same in all situations.

    One ways are not a fun project but if you're mechanically inclined and have a good place to work in with good tools its not too terrible. Figure around 250-300 bucks for all the parts depending on what all you need.

  8. #8
    Join Date
    Apr 2005
    Location
    south carolina
    Posts
    1,999
    it will work, if i remember right, i am using one out of on 04 or 05... if it is the one way, go ahead and grab the LA one way so you will not have this problem again. it is fairly involved to replace it, i will try to find the write up on how to do it, maybe it is at raptortranny.com?? anyone help me on this?
    http://pg.photos.yahoo.com/ph/tater_kamik/my_photos

    http://www.myspace.com/tater_kamik

  9. #9
    Join Date
    Sep 2005
    Location
    michigan
    Posts
    10
    Thanks for hte help. The CDI is working great. I just have the fix the one way. Is there a website for the LA one?
    Jeff

  10. #10
    Join Date
    Apr 2005
    Location
    south carolina
    Posts
    1,999
    ask c&d on here, or you can check out albaaction.com
    http://pg.photos.yahoo.com/ph/tater_kamik/my_photos

    http://www.myspace.com/tater_kamik

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •