Results 1 to 2 of 2

Thread: Sporket ????

  1. #1
    Join Date
    Aug 2005
    Location
    OHIO
    Posts
    264

    Sporket ????

    if i put a 12 tooth front sporket on my raptor 350 will it have more bottom end and do i have to change the back one too?
    currently riding
    2002 cr 125
    1989 yz 250

  2. #2
    Join Date
    Apr 2005
    Location
    south carolina
    Posts
    1,999
    well, the SPROCKET not sporket... but yes, you will gain low end, stock is 13 teeth i believe. no, you do not have to change the rear one, but it is good practice in my opinion, if you are goint to stick with that size, to go ahead and change the front, rear, and chain, but it is not required unless the items are worn. remember, you are going to a smaller sprocket, so if you have your rear already adjusted all the way out, you would have to get a new chain. dont skim and get aluminum sprockets, you will tear right through them, get steel or better.
    http://pg.photos.yahoo.com/ph/tater_kamik/my_photos

    http://www.myspace.com/tater_kamik

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •