July Quad of the Month

[TheFontMaster]

As many of you know, this month I am having the Quad of the Month be all minis. I wanted to some recognition to the smaller quads that people tend to forget about. While there isn't a full poll this month there are some very nice quads, some of which could rival full sized quads, and there is one more quad that will be entered once pictures are gotten in.


I will have the pics up momentarily

[TheFontMaster]

Hetrick B52 cylinder
Hetrick exhaust
Hetrick clutch mods
28mm carb w/uni filter
+3 a-arms w/ elka shocks
+4 durablue axle
Elka rear shock
Gibson steering stabilizer
powermadd handguards
holeshot tires w/ douglas wheels

[TheFontMaster]

Hetrick race pipe, high performance clutch mod with a delta rear clutch and 5.4 rollers on front variator. Battery box removed, oil injection removed, premixed at 32.1 with maxima castrol 927 racing oil. Works shocks all the way around, ITP holeshot front tires mounted on 10 inch 3x2 offset blue Douglas rims, Snow Hog rear tires mounted on 8 inch 2x4 offset blue douglas rims. Pro design kill switch.
Mikuni 24mm carburator, uni air filter with outerwears and , new intake manifold and malossi reed cage, 27 tooth rebel gear rear sprocket with a D.I.D chain and tensionor, +3 a-arms,+2 Hetrick swingarm and wheel spacers on back. Reinforced frame with gussets,Douglas v-series bumper, Tag handlebars, ac nerfs with heel guards, billet starter block off plate.

[TheFontMaster]

Engine- 124cc by Robbs Racing Engines
Frame- Stock/Gusseted
Front Suspension- Robbs Racing bolt on A-arms- plus 12"
with Works Performance Black Widow Series Shocks,
400EX spindles and brakes
Rear Suspension- Robbs Racing +2 swing-arm with
titanium axle and 450R rear brake caliper. Works Performance
Black Widow rear shock.

[TheFontMaster]

Modded 250X frame and swingarm
Burguard 400EX +2 chrome a-arms
400EX spindles
Durablue X-33 axle with custom hubs
2003 YZ85 motor
Pro-Circuit pipe
Shorty silencer
Boyesen Rad valve
Tusk polished nerfs
Ohlins shocks up front
Revalved 300EX rear shock
10X6 ITP with American racers up front
6X9 Douglas beadlocks with 12" Burris kart tires in the rear
YFZ450 plastic and seat
MX Graphics decal kit
AC bumper and grab bar

Built to run TT in the 90 mod class.

[TheFontMaster]

AC Nerfs w/ heel guards ( not shown)
2001 modded Kasea Skyhawk 90
HC Piston(12:5)
Billet Aluminum Rod
CDI(12,000)
Ported head
28mm flatside Carb.
Carbon fiber reed cage
full clutch mod
Trinity pipe
Works shocks
+2 AArms w/2-4 offset holeshots
+4 DuraBlue Axle
Fast Trekker rears on Douglas
Fly HandleBars
Custom seat cover

[TheFontMaster]

Frame: LRD Aluminum
A Arms: Burgard +2 +1
Swingarm: Shortened ’89 Honda 250R
Steering Stem: Chrome Lonestar
Stabilizer: PEP
Axle: DuraBlue +2
Carrier: Stock ‘86 Honda 250R
Locknut: Stock ‘86 Honda 250R
Hubs F|R: Stock ‘86 Honda 250R
Bars: Renthal
Grips: Renthal
Nerfs: DG
Bumper: BlingStar
Grab Bar: DG
Front Shocks: ’89 Honda 250R
Rear Shock: PEP with Relay
Brake Lines: Braided Steel
Rotors F|R: Stock Honda 250R
Rims F|R: Douglas Aluminum
Tires F|R: ITP Holeshots

Plastic: Maier
Graphics|Seat Cover: FX
Bar Pad: Renthal
Fuel Tank: Stock Honda 250R
Displacement: 85 CC
Carburetor: Stock 2002 Suzuki RM 85
Air Filter|Box: Uni Filter/ Stock ’86 Honda 250R
Clutch|Plates: Stock Suzuki
Gearing F|R: 14/38
Cooling: Stock Honda 250R

[TheFontMaster]

+3 a-arms + 2 '' swingarm works shocks all the way around itp holeshots all the way around custom robs racing motor 35 32 tooth rear sporcket 19 front fly bars steering stabilizer and AC pro pegs

***edited***

[Evana13]

Hey rob do you remeber Zach's red bike that you helped build well it's black now.