|
|
Live to ride Ride to live
The manuel and the honda shop told me to grease around the airbox assembly when i put the airfilter back onto the airboot... it is kinda confusing to now where to grease it so less dirt or water can get in... where do i grease it....? i will show you where i greased it and you can tell me if i did it right.... (stock airfilter)
2004 400ex
20 inch maxxis razor tires
one industries graphics
graphics seat cover
Renthal 7/8 bars
acerbid rally pro handguards
1/4inch swingarm skidplate
rear shock revalved by c&d
e-brake block off
Live to ride Ride to live
In the red circle like where the blue is...? is this right? and just go all around and make a complete circle with grease??
2004 400ex
20 inch maxxis razor tires
one industries graphics
graphics seat cover
Renthal 7/8 bars
acerbid rally pro handguards
1/4inch swingarm skidplate
rear shock revalved by c&d
e-brake block off
Live to ride Ride to live
where the orange is.. like grease that little lip right... ?? any other places i missed?
2004 400ex
20 inch maxxis razor tires
one industries graphics
graphics seat cover
Renthal 7/8 bars
acerbid rally pro handguards
1/4inch swingarm skidplate
rear shock revalved by c&d
e-brake block off
Registered User
That's where I grease it to but I always put a little on the other end to. Before I put the metal part back in the foam part I put grease on the little metal pin that sticks out of the form.
03 400ex. HMF s/o. XR cam. sparks flywheel key. chokeless. pep dampener.AC bumper.PRM skids.Tinner scoops.Arens nerfs.
Senior Member
I never grease it. In fact, I don't know anyone who does.
Operator of South Fork Competition Park near Richmond, VA.
www.southforkmx.com or "Like" South Fork Competition Park on Facebook.
2013 CRF450R
2006 TRX450R
Beyond Thunderdome
Thats a new one to me, I do use never-seize on certain bolts that need to removed often though...
04' 400EX
-HMF Full, Brushed can
-Mud Lites
-Swinger Skid
-My Aluminum airbox
-Race Cut
"Yes, I get satisfaction out of hitting a guy and seeing him lie there a while."-Jack Lambert
Senior Member
i never did that with stock filters but with the k&n i grease it cuz it has the metal flange instead of a boot. but those are the right spots to grease it.
2003 4??EX w/: too much stuff to list. im afraid to total the receipts.
2001 AC ZR600 vev efi le ITS FORSALE
1995 Chevy S-10 LS 4.3 5speed 6/7 drop with some custom stuff....lowest static in town....
Moderator
You should be greasing the inside of the boot so the grease is between the airboot and the metal flange.Originally posted by 400exrider26
In the red circle like where the blue is...? is this right? and just go all around and make a complete circle with grease??
ATVRiders Janitorial Technician
!!!!!DON'T FEED THE TROLLS!!!!!!
Live to ride Ride to live
joe, like grease where the green is on the diagram... right?
Also, what is the best way to clean the boot from the airbox to the carb?
2004 400ex
20 inch maxxis razor tires
one industries graphics
graphics seat cover
Renthal 7/8 bars
acerbid rally pro handguards
1/4inch swingarm skidplate
rear shock revalved by c&d
e-brake block off
Registered User
I recommend not greasing that, the air filter could fall off.
Posting Permissions
Reply With Quote