|
|
Junior Member
hey guys, i just bought a new pipe on ebay, the DG...
I have a 96 300ex and was hoping someone could give me a place to start with jetting........the needle position and maybe the air screw.........any help would be great.....ohh, and it also has a K&N filter........thats all.......
thanks again
300ex racer
i woulds say to get a 130 main jetturn piolit screw out a 1\2 turn move needle up one 4 from the top
2002 300ex
powroll 313 kit,works fronts,extended A-arms
01 raptor shock
+2 swingarm
web stage 2 cam
hardened rockers
knibblewhite springs
edelbrock carb
IMS gas tank
rev box
durablue axle 2+2
DID cam chain
boss bearing carrier
T9 baja rims 8''
18-9.5-8 turf tamers
Razr ms fronts on stockers
fmf header
hmf slip on
ebc pads
dg nerfs
dg grab bar
14/38gearing
gunnar kill switch
billet tie rods
tag x5 bars
race lsmx
tCt Racing
www.timmymx.com
98% of the teenage population will try, does or has tried smoking pot. If you're one of the 2% who hasn't, copy & paste this into your signature
Senior Member
thats what i have now, 130 main, up 1 on the needle and im 41/2 turns out on pilot but i have a different head pipe and vented lid. havent had a chance to make sure its right yet thou
ED B.
'08 f-150 supercrew
'03 ford exploder
Posting Permissions
Reply With Quote