Page 1 of 3 123 LastLast
Results 1 to 10 of 29

Thread: Edelbrock QuickSilver Carb

  1. #1
    Join Date
    Nov 2004
    Location
    OREGON
    Posts
    1,986

    Edelbrock QuickSilver Carb

    Will someone explain to me about the Edelbrock QuickSilver Carbs? I heard you don't have to jet. Does thin mean I will never have to rejet again even if I get more mods?Also what size do they come in and are they hard to install?
    BEWARE OF ADAM MILLER HE IS A THIEF

  2. #2
    Join Date
    Mar 2005
    Location
    new jersey
    Posts
    2
    i had the edlebrock carb on my 400 but it sucked it would pop and make the quad very hard to start becouse it took away the choke you should juss get ur stock carb it will pay off and i maid more power with my stock on jetted then the edelbrock!

  3. #3
    Join Date
    Nov 2004
    Location
    OREGON
    Posts
    1,986
    any other input?
    BEWARE OF ADAM MILLER HE IS A THIEF

  4. #4
    Join Date
    Jul 2003
    Location
    minnesota
    Posts
    519
    i had the edlebrock carb on my 400 but it sucked it would pop and make the quad very hard to start becouse it took away the choke you should juss get ur stock carb it will pay off and i maid more power with my stock on jetted then the edelbrock!
    sounds like u just didnt have it adjusted correctly. ive talked to a few people with this carb and say they loved it. took a little bit to get used to with the adjusting of the needles but ran real good.

    i myself will be running this carb on my powroll 416 stroker.

    as for the no choke hit ur throttle a few times and will start right up because of the accelerator pump.

    just my .02

    luke
    team hoser
    2004 yfz 450
    trackside performance
    rath racing
    Leo Vince exhaust
    four/oneal gear
    Elka suspension
    Janssen motorsports

  5. #5
    Join Date
    Nov 2004
    Location
    OREGON
    Posts
    1,986
    Anybody know what size they are?(like 38mm?)
    BEWARE OF ADAM MILLER HE IS A THIEF

  6. #6
    Join Date
    Jul 2003
    Location
    minnesota
    Posts
    519
    the regular quiksilver is a 38-36 oval shaped i believe. and the eichner 440 is either 38 or 39 mm
    team hoser
    2004 yfz 450
    trackside performance
    rath racing
    Leo Vince exhaust
    four/oneal gear
    Elka suspension
    Janssen motorsports

  7. #7
    Join Date
    Nov 2004
    Location
    OREGON
    Posts
    1,986
    what is 38-36? why not just like 38 or whatever?Also what brand of jets do they use?
    BEWARE OF ADAM MILLER HE IS A THIEF

  8. #8
    Join Date
    Jul 2003
    Location
    minnesota
    Posts
    519
    insteadof being a perfect circle on the engine side of the carb it is oval 38mm by 36mm. it doesnt use any jets just a needle that u move up or down and change the sizes.(u get 3 with the carb)
    team hoser
    2004 yfz 450
    trackside performance
    rath racing
    Leo Vince exhaust
    four/oneal gear
    Elka suspension
    Janssen motorsports

  9. #9
    Join Date
    Apr 2002
    Location
    Illinois
    Posts
    533

  10. #10
    Join Date
    Jul 2003
    Location
    minnesota
    Posts
    519
    ya i was lookin for that. should help him out some
    team hoser
    2004 yfz 450
    trackside performance
    rath racing
    Leo Vince exhaust
    four/oneal gear
    Elka suspension
    Janssen motorsports

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •