atvriders project blaster/following bradley300 thru a gncc season

[bradley300]

about time we got a forum right guys! sport class is the best!. Anyway, in this forum i will be writing a sport class race report for every gncc as well as writing an article showing what it takes to build a gncc sport class blaster. Myquad is the base for this and most of you know its pretty much done, but i will be going back and will be starting at the begining. I plan on including what parts i like, why i like them, what parts you may not want to use, reviews on parts and how-to install on some things as well. first articl will be up shortly, pretty much includeds everything i just said, but also includes a few general set up tips. so be sure to look out for up coming articles

[Cody_300ex]

Sounds nice bradley, I will be posting a step by step reveiw of rebuilding a 300ex engine, also port & poilshin how-to, and a 4 angle valve cut how-to.

[hardkoratvmxr]

since you guys are doing so well i might try to give a review on my 300ex frame gussets my frame is being torn down right now and will be gusseting by the endo f the week and will give a full report on weak sections for both mx and gncc and will then give a build up report

[bradley300]

a where to gusset a 300ex would be a good one!

[hardkoratvmxr]

motor is all that needs to be out will be starting coverage on gussets on friday

[countypark]

Frame strengthening on a 300EX is fairly simple.

The weak areas include:

Front upper shock mounts.
Rear upper Shock mount
Frame near foot pegs.

I strengthened mine by boxing the frame above the shockmount with strips of steel and I welded up the existing shockmount for additional strength.

In the rear I added gussets between the frame and sub-frame above the rear shock mount.

I also boxed the frame near the foot pegs.

[hardkoratvmxr]

well i am just doing it to give new 300ex owners a step by step process

[bradley300]

when you do it, make sure to take lots of pics

[hardkoratvmxr]

iight