February Quad of the Month entry thread

[spareparts]

This months Quad of the Month will be an open month. Anyone can enter any quad. Here are the rules, and the mods list to fill out and post with your quad.

Rules:
http://www.exriders.com/vbb/showthre...hreadid=146713

Mods list:
http://www.exriders.com/vbb/showthre...hreadid=162941

[McCrillis]

Here is my 04 TRX450r






Chassis | Suspension | Controls:

Frame: Stock Silver
A Arms: Houser Slicast LT
Swingarm: Stock
Steering Stem: Houser +2
Stbilizer: Streamline 7-way
Axle: Stock
Carrier: Stock
Locknut: Stock
Hubs F|R: Stock Powdercoated yellow
Bars: Pro Taper SE Hi-Rise
Throttle/Clutch Lever: Asv unbreakable clutch and brake lever, ESR brake and shifter pedals
Grips: Spider yellow grips, pro taper blister pads
Nerfs: AC Black Powdercoated w/ custom black and yellow netting
Bumper: Blingstar maltese bumper black and yellow
Grab Bar: Blingstar black
Front Shocks: Fox evol with custom SSI decals
Rear Shock: Elka dune edition shock with elka linkage
Brake Lines: Streamline steel braided
Rotors F|R: stock
Rims F|R: Itp beadlock black and yellow
Tires F|R: sandstars



Body:

Plastic: stock race cut, Quadtech hood
Graphics|Seat Cover: Amr ed hardy graphics, Quadtech humpseat
Number Backgrounds: Maier race plate
Handguards: Powermadds Black and yellow
Bar Pad: pro-taper
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: Esr 480
Bore & Stroke: 480, stock stroke
Displacement: 12:5 wiseco
Cam: Hotcam Stage 2
Carburetor: Tokyo Mods FCR 40mm
Air Filter|Box: Fuel Customs Intake
Pipe|Silencer: Full Dasa Exhaust
Clutch|Plates: Tusk clutch kit
Gearing F|R: Stock
CDI|Killswitch: ESR CDI
Cooling: CV4 hoses and engine ice
Other:ESR case saver, yellow O-ring chain, tusk tie rod ends, tusk gas cap, moose clutch cover, yellow hp exhaust wrap, blingstar block off plate

[eastside 400]

Chassis | Suspension | Controls:

Frame: 2005 Gusseted and PC'ed by Lucarelli PC
A Arms: JB ProSeries
Swingarm: JB Superlink
Steering Stem: Burgard +1
Subframe: Walsh Adjustable
Stbilizer: Elka
Axle: RPM
Carrier: Burgard
Locknut: Team
Hubs F|R: Stock
Bars: Sunline
Throttle/Clutch Lever: ASV
Grips: ProTaper pillowtop lites
Nerfs: Rath/Lucarelli PC
Bumper: Stock
Grab Bar: Blingstar
Front Shocks: Fox DSC-MXP modified
Rear Shock: Axis hi/low
Brake Lines: Streamline
Rotors F|R: Braking
Rims F|R: DWT
Tires F|R: Maxxis yellow label/Dunlop
Powder Coating done by Lucarelli PC


Body:

Plastic: Stock w/ TRP hood
Graphics|Seat Cover: MGX Unlimited-MCC race team/ N-style
Number Backgrounds: MGX
Handguards: Cycra
Bar Pad: Sunline
Fuel Tank: Stock w/ TRP cover



Engine|Drive System:

Cylinder|Head: JE ProSeries 13.8:1/MXP epoxy head, MXP spring kit, +1 ferrea in+exh valves, Bronze guides
Bore & Stroke: stock
Displacement: 450
Cam: Web 242/921
Carburetor: Bored FCR
Air Filter|Box: Uni/Stock 06+
Pipe|Silencer: Dasa pictured-HMF ironman current
Clutch|Plates: Wiseco Basket/Real Bad modified hub/Stock plates/Tokyo Mods Springs
Gearing F|R: 14/38
CDI|Killswitch: CRF Ignition/Pro Design
Cooling: CV4 hoses, CV4 high pressure Cap, Boyeseen Super Cooler water pump
Other:

[DirtyBirdRacing]

Chassis | Suspension | Controls:

Frame: Custom Red Paint
A Arms: Stock W/Paint job
Swingarm: Stock W/Paint job
Steering Stem: Stock W/Paint job
Stbilizer: NONE
Axle: Stock
Carrier: Stock
Locknut: Stock
Hubs F|R: Stock
Bars: Fly hauling? (Unknown)
Throttle/Clutch Lever: Moose racing (red grips)
Grips: Red Skull
Nerfs: NONE
Bumper: Tuck Comp W/Skull insert
Grab Bar: PRM
Front Shocks: 05 450R
Rear Shock: Stock
Brake Lines: Stock
Rotors F|R: Stock
Rims F|R: Unknown
Tires F|R: Unknown



Body: Red

Plastic: Stock,
Graphics|Seat Cover: AMR Skull graphic & Ebay Skull seat cover
Number Backgrounds: NONE
Handguards: NONE
Bar Pad: Unknown
Fuel Tank: Stock



Engine|Drive System: Stock

Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: 400
Cam: Stock
Carburetor: Stock
Air Filter|Box: K&N Filter W/Stock box
Pipe|Silencer: "custom" Two brothers m.7
Clutch|Plates: Stock
Gearing F|R: Stock
CDI|Killswitch: Stock/None
Cooling: Stock
Other:
Rear disk break - Saw blade style
Break and throttle covers - Ebay aftermarket
HID's
LEDs in front bumper

[McCrillis]

Originally posted by foxracer#4
CAN ANYONE HELP ME GET PHOTOS UP IT WILL NO EXCEPT THEM WHAT AM I DOING WRONG THANKS

Please stop YELLING!!! Please is always nice, but anyways you have to upload your photos on to photobucket or a site like it, then copy the image code and paste it where you want. Don't mention it.

[vondeister]

posted for foxracer#4

Keister Racing TRX450





Frame: STOCK,GUSSITED AND SHORTENED BY LONESTAR(CHROME BLUE AND ORANGE )
A Arms:LONESTAR(TITANIUM)
Swingarm:LONESTAR-2 NO LINK
Steering Stem:LONESTAR+2

Axle:LONESTAR
Carrier:LONESTAR
Locknut: LONESTAR
Hubs F|R:LONESTAR
Bars: PRO TAPER
Throttle/Clutch Lever:WORKS CONNECTION
Grips:SPIDER
NerfsG
Bumper: DG
Grab BarG
Front Shocks:OHLINS
Rear Shock:OHLINS NO LINK
Brake Lines:LONESTAR
Rotors F|R:STOCK
Rims F|R: ITP
Tires F|R: AMERICAN RACERS/HOOSIERS



Body:

Plastic:FRONT MAIER/REAR LAKER CUSTOMS
Graphics|Seat Cover:AMR GRAPHICS/QUAD TECH





Engine|Drive System:

Cylinder|Head:STOCK/CV4
Bore & Stroke: STOCK
Displacement:450
Cam:WEB
Carburetor:TOKYO MOD FCR
Air Filter|Box:CUSTOM/DASA
Pipe|SilencerASA
Clutch|Plates:HINSON FULL KIT
Gearing F|R:13/35
CDI|Killswitch:PRO DESIGN/TOKYO MODS FULLY ADJUSTABLE
Cooling:STOCK
SWAYBAR;RATH RACING/CUSTOM MOUNTS BY LONESTAR

OTHER;CARBON FIBER TY RODS/CARBON FIBER SWAYBAR LINKS/COMPLETE POWDER COATING BY MISSION MINDED POWDERCOATING/CHROME&ORANGE/ POLISHED CASES BY H&H EXTREME ATV

[vondeister]

2

[vondeister]

3

[vondeister]

4

[vondeister]

5