Results 1 to 7 of 7

Thread: 416 gearing

  1. #1
    Join Date
    May 2004
    Location
    IN
    Posts
    3,540

    416 gearing

    Whats some good gearing for the front/rear sprockets..like a good all around gearing with 18 inch tires in the rear
    05 walsh trx450r - sold

  2. #2
    Join Date
    May 2004
    Location
    IN
    Posts
    3,540
    anyone?
    05 walsh trx450r - sold

  3. #3
    Join Date
    Aug 2004
    Posts
    2,545
    whats wrong with stock gearing? too high? too low?

  4. #4
    Join Date
    May 2004
    Location
    IN
    Posts
    3,540
    is the stock gearing with 18's and a 416 would be ok?
    05 walsh trx450r - sold

  5. #5
    Join Date
    Aug 2004
    Posts
    2,545
    well stockers are 20" so you will loose a little top end i guess. personally i would just run stock gearing and see how you like it.

  6. #6
    Join Date
    May 2002
    Location
    NE Indiana
    Posts
    1,139
    It is up to you depending on where you want the power, more bottom or top. If you want the gearing close to stock again try running a 36t rear sprocket. This makes the gearing close to stock when going to a smaller 18" rear tire.
    Honda TRX450r

    GNCC racer

  7. #7
    Join Date
    Mar 2001
    Location
    Lou-A-Vull, KY
    Posts
    2,024
    15/36 was the best gearing I found for 18 inch tires.

    Which is 2 less than stock.
    2001 Honda 416SS with a powerbong


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •