To bleed the brakes.... First,I am going to catch some flak for my method but a guarantee it works better than most. Make sure you have the master cylinder full, then loosen and retighten the bleeders to make sure they arent seized up. Now you need a partner, have him work the pedal or lever while you get fluid all over yourself. Put a latex glove on,loosen the bleeder and hold you finger over it tight,now have your buddy slowly press the pedal. The idea is pressure will push your finger away and allow the air and fluid out then will keep it from sucking air back in when he releases the pedal. Pump it 4 or 5 times and your done, close the bleeder. Just make sure you keep fluid in cause if it runs out you start all over! Try it!
2002 400 EX Yellow(2 more hp than red)
K&N filter w/outerwear
Dynojet kit
AC nerfbars
14 tooth renthal
146 main,stock pilot,screw out 3 turns-starts perfect with no choke.
No FEAR, No SHAME, No PROBLEMS
Cam 2 runeth through my viens.
Past rides:73 Honda SL70, 19?? Honda ATC 90, 83 Honda XR80, 82 Yamaha YZ80, 84 Yamaha YZ80, 87 Yamaha YZ80, 85 Kawasaki KX125, 82 Yamaha YZ 250, 88 Yamaha Banshee(much bling bling),87 Yamaha Warrior(mistake)