Whats required to install an aftermarket clutch lever on an 04 ltz400? i.e. the electrical wiring that runs into the stock clutch harness for the bike to start.
Whats required to install an aftermarket clutch lever on an 04 ltz400? i.e. the electrical wiring that runs into the stock clutch harness for the bike to start.
If you unplug the wires and twist them together, i beleive the bike will start in gear, with or without the clutch lever pulled. If i remember right that's all there is.
04' YFZ 450
06' LTR 450
03' Z400
01' 406EX- R.I.P
97' MXZ 583
02' mxzx 600
District 34, #450
Aim: Hippiekicker 250
Thanks, I picked up an RTC this week and hoping to install this weekend, I hope it's that easy to put on.
It is that easy...
**********************************
'04 KFX 400 [Orange]
---> Central California Rider <---
CT Racing Exhaust
Hotcams - (2047-1N and 2048-1E)
DRZe Base Gasket and Springs
Dynatek CDI
D.I.D Cam Chain
Works Triple-Rates w/o rezzies
Dynojet Needle - 3rd Clip
Mikuni Main - 160 / 25 PJ / 2.5 Turns Out
Carb Mounted Pull Choke
NOSS Intake w/K&N Filter
EHS Racing Air Box Lid
Tag X5 Bars w/NOSS Dash
PowerMadd Handguards
PEP Steering Stabilizer
13T Front Sprocket
**********************************
It worked out great, I should have replaced it a long time ago. RTC is the way to go.
no,. ASV is the way to go