I am in baton rouge, la so the elevation is lower than most but I am putting a full curtis spark exhaust and a K&N filter on a kfx400 what jetting should I use???? thanks for the help...- Randy
|
|
Senior Member
I am in baton rouge, la so the elevation is lower than most but I am putting a full curtis spark exhaust and a K&N filter on a kfx400 what jetting should I use???? thanks for the help...- Randy
2001 416EX
Weisco 416 Dome 11.1 Comp. Piston
Hot Cam (Stage 2)
Port and Polished
Curtis Sparks x-6 (Drag Shorty One)
Curtis Sparks CDI Rev Box
Uni Air Fiter
K&N Power Lid
Silver Maier Plastics
Factory Effex Stick Kit
Fast Trekkers all the way around
AC Bumper
Answer ProTaper Handlebars
AC Pro Peg Nerfs
Check my bike out!! Click Here..... Let me know what you think.
Member
Look at my sig, that should put you really close.
**********************************
'04 KFX 400 [Orange]
---> Central California Rider <---
CT Racing Exhaust
Hotcams - (2047-1N and 2048-1E)
DRZe Base Gasket and Springs
Dynatek CDI
D.I.D Cam Chain
Works Triple-Rates w/o rezzies
Dynojet Needle - 3rd Clip
Mikuni Main - 160 / 25 PJ / 2.5 Turns Out
Carb Mounted Pull Choke
NOSS Intake w/K&N Filter
EHS Racing Air Box Lid
Tag X5 Bars w/NOSS Dash
PowerMadd Handguards
PEP Steering Stabilizer
13T Front Sprocket
**********************************
Junior Member
My specs probably won't matter because I'm all the way over here in Hawaii. But I'm running a 170 Mikuni main, stock pilot, Dynojet needle, and I think my screw is 3 or 3 1/2 turns out. Just remember, Mikuni rates theirs differently than Dynojet.
Posting Permissions
Reply With Quote