|
|
06 season here we come
I just put my WB e-seris slip-on pipe on this morning and checkes to make sure that there are no leaks and found a little bit of cool air coming out of the front side at the top(where the s bend part is ( where it is joined by the head pipe), is this normal..
Thanks very much
400exBro
07 Honda
04 Honda
Timo Nielsen: CMRC ATV Intermediate class #99
Senior Member
i don't think it will hurt it....but i'd try to fix it do you have your clamp tightened down tight?...kinda a dumb ? but i forget stuff like that alot..... hope this helps
06 YFZ 450..all white... LRD pipe, jet kit, lid removed, cam mod
LT JB front end and Ohlins shocks coming before june.
Senior Member
Mine does that as well, and the clamp is tightened down good. I think it is just the factor of aftermarket+stock parts=mediocre fit. Could try some high temp exhaust sealent, but I don't think even I care enough about it to do anything to try and fix it.
I found out when I felt the hairs on my leg getting moved by the wind created by the pipe. I thought maybe it was just static on the plastic, but then I realized that a little exhaust was escaping. I don't think it is enough to make a difference though.
2001 416EX
Yeah, it's tuned.
06 season here we come
no thats not it
i don't have exhaust coming from there i have it comes from the inlet side of the pipe somwhere around the top or so, i didn't feel and around the head pipe, it's just a tiny bit you can only feel it really close to the pipe. I also thought that it part of the back presure and some of it gets out, i dunna that sounds dumb!
i guess i'll call WB today and find out
Thanks
Last edited by 400exBro; 08-24-2001 at 07:04 PM.
07 Honda
04 Honda
Timo Nielsen: CMRC ATV Intermediate class #99
06 season here we come
No replys !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!
Come guys i need some help on this topic
07 Honda
04 Honda
Timo Nielsen: CMRC ATV Intermediate class #99
Sick Style ATV Racing
having a exhuast leak will lead to major engine damage, it causes poping or backfiring on decell, wihch is no good. i have the s bend and it was leaking i just mounted the clamp up forther were the end of the pipe meets the head pipe so nothing leaks,and were those cut outs are on the end of the s bend i have the clamp completely over those cuts so it cant leak at all.
#71
2000 Roll/Laeger's/Houser/Axis 416ex
2001 Arens/Laeger's/PEP 250r
Thanks to my sponsors for 2003 : 00-Buck ATV Racing, Team Pompton, Nebulae Race Team, Milton Inn Packaged Goods, Napa Auto Parts of Oak Ridge, Sick Style Racing, WD-40, Hinson Racing, IMS, Sport Center Racing, and Nac's racing
I'd also like to give a special thanks to Baldwin Motorsports for all there help and support they gave me.
We are now accepting resumes, this is a New Jersey based team. westsyder50@hotmail.com
http://www.geocities.com/sickstyleatv/index.html
Team Rcokford Fosgate 401+ northeast champ 147.7db
really i8t hurts it oh crap im screwed well better sell my quad so i can let the next guy deal with it
I have a WB e-series pipe also. I put it on myself on my 300ex and had the same problem. The pipe doesn't come with a gasket or a "donut". The part goes at the end of the slip on exhuast and goes around the header pipe towards the end. I had to go back up to the quad shop and buy a 15$ part when I just spent 250$ on a pipe. wow.
Senior Member
i also have a WB slip on and air comes out the top part of the silencer i guess this is normal
my pipe doesnt have air leaks,
i guess im a future macanic hahaha not
Posting Permissions
Reply With Quote