Can you run a stage 2 Hot Cam without hardfaced rockers if
you are running the FST oil cooler?
|
|
Junior Member
stage 2 hot cam
Can you run a stage 2 Hot Cam without hardfaced rockers if
you are running the FST oil cooler?
Far North Racing
You don't need hardened rockers for the hot cams. Just put it in and your ready to rip. BTW do you already have a piston??? This cam is designed for built motors, if you have the stock piston, you will want to go with the stage 1 hot cam.
Nick Reid
Special Thanks Goes To C&D Racing!
Junior Member
I have a 416 built by profab atv with 11:1 comp, porting, larger valves, etc. I know the cam they put in was the xr400 one which I hear isn't much of an improvement over stock. I was thinking that a cam would be a pretty easy way to gain some power.
Registered User
do NOT use hardened rockers with the hotcams.
the cooler should not have anything to do with what cam you can run with what rockers. yes, the cooler may help keep the cam and internals a little cooler though.
2005 450r
*sold* 2001 400ex
"If you think you can, you can. If you think you can't, your right."
"A leader will take you where you want to go. A great leader will not necessarily take you where you want to go but where you ought to be."
"If you want to do something, you will find a way; if you don't, you'll find and excuse!"
"Its not aptitude but attitude that determines your altitude."
Junior Member
How much and where do I get one. Will I notice much improvement over the xr cam? I need all the power I can get!
Far North Racing
give C&D racing a call
Nick Reid
Special Thanks Goes To C&D Racing!
Posting Permissions
Reply With Quote