1 Attachment(s)
400EX Custom Cooling (lots of pics)
This is the stock fittings, like i said before you have to grind the clamps to seperate these from the stock rubber hose, pretty simple to do just wear your goggles
These particular two come from the hose that runs from the bottom end of the motor to the bottom of the oil tank
A 8AN SS Braided hose fits pretty snug over these two fittings, rubber ones more snug than teflon ones
you will need 1/2" worm clamps to seel them on, or atleast that is what i used
im going to be uploading alot of pics on this thread, so they will keep coming