Printable View
Exactly, works great, key FILL RESERVOIR!!!!!!!!!Quote:
Originally posted by 250r rider 88
tighten up the lines, fill the reservoir, and seal it, pump it 10-15 times and then keep the level held in and wire tie it to the handlebars, come back the next day and they should be bled, great tip i found from someone on here
Ken
yup, this is option A if you have timeQuote:
Originally posted by quadracer707
Exactly, works great, key FILL RESERVOIR!!!!!!!!!
Ken
if you are in a rush use the bleeder tool i was talking about, and if neither of those get them bled somethings not right in the brake system itself
I think they tried thatcwith no luck already .
was the master cylinder taken apart and rebuilt or anything like that?
when i rebuilt my 250R from the frame up i had the master cylinder powdercoated and it was reassembled wrong and it never would bleed till i figured it out, hopefully thats not your issue
HOLY BATMAN.. I cant believe it- WERE DONE!!! :blah: :D
The brakes and killswitch was the biggest PITA. We had to take it down to local Yamaha dealer to lend us a hand for a few hours. The boyz at the shop pretty much left there customers and came out to check out the new build. TOO FUNNY!! LOL :p
Just need to throw on some graphics and waiting on a tire shipment,then were off to the desert on Sunday !
Brandon is totally stoked to ride it! ...but nervous a little about the new found power. He hasnt rode much since summer and hes afraid he might flip it and break the new plastic. :o :blah:
The lil ripper def. has some good power !
We will be meeting up with Fox GURU Rick Strickland next weekend at the WORCS Seaon Opener to dial in the new suspension for the Season Opener. Looking forward to meeting him a maybe learning a thing or two on the new shocks. :)
What Im NOT looking forward to is the Season Opener is expected to have very bad weather ALL WEEK LONG and weekend of the race. Everyone pray its not a repeat of 2008 or we will be packing up and coming home.This isnt supposed to happen in Arizona dang it!! :( I was looking forward to getting a sunburn! lol
Ill be getting some photos but Ill save most for the full build article coming up soon . Ill be sure to post
Thanks for checking out the WORCS 250 build !
your just gonna leave us hangin????where's the pics?:blah:
Ill take some shots tomorrow of it completed .lol
nice build and good luck
Today was a cooold and windy day. What I needed was some blue sunny skies! :rolleyes:
Got a few pics but junked most of them.
Today was getting used to the quad. I think the only thing we ran into was he kept catching his foot in the netting and his boots are new and stiff,so shifting was abit tough at times. We might have to work on adjusting the shifter abit .
Suspension- worked like a charm.... :devil:
Heres a couple photos from today, Ill have more soon.
BIG thanks to atvriders member and freind driver311 who came and helped us out when we started to run out of time. :)
Also a HUGE thanks to all those who participated in the build and producing "THE COOLEST" WORCS 250 . :cool:
MORE TO COME!
http://www.pbase.com/quadjunkies/image/121181207.jpg
http://www.pbase.com/quadjunkies/image/121181387.jpg
http://www.pbase.com/quadjunkies/image/121181388.jpg
http://www.pbase.com/quadjunkies/image/121181208.jpg
That is sooooooooooooooooo sick!!!