i need to know if the 250x and 350x mounts are the same, reason i ask, is i am planning on putting a 250x motor in a 250r frame and have found a frame that is already set up for a 350x, will the 250x motor bolt right in with no mods?
Printable View
i need to know if the 250x and 350x mounts are the same, reason i ask, is i am planning on putting a 250x motor in a 250r frame and have found a frame that is already set up for a 350x, will the 250x motor bolt right in with no mods?
bump
it could fit and it may not..but if it dont it wont be by much and shouldnt take much modding to fix
yeh, i know that it won't be hard to fabricate the mounts, i work at a metals shop, but the less work i have to do the better
bump
I know they are pretty similar. You've probably heard of the 250x/350x converstion, I can't imagine it's all that difficult to go the other direction.
on the 350x to a 250x u cut a piece of the motor mount off of the motor..its to line up the mounts so i dont know if they'll all line up or not..probably not unless it was set-up to cut the mount off of the motor..but if it wasnt then it still shouldnt be hard to fix
im pretty sure, when using a 300ex frame, there is one mount on the right side you have to shave. so its not that hard.