-
250r/400ex hybrid...
i am in the begining of a hybrid consisting of a 400ex chassis and a 1986 250r engine. i had some stock parts left from my 1999 400ex build up throughout the years, along with a couple extra 86 250r motors i acquired after the purchase of my 250r in 2002.(i think it was '02.)
anyways, i will have pics of mediocore quality(cell, no digital). i hope to answer questions and maybe get some help if needed.
-
1 Attachment(s)
-
1 Attachment(s)
other side: you can see i used two right side 400ex mounts and removed a section from each to clear cases.
-
1 Attachment(s)
the radiator has been modded to allow better access to filler neck. the outlets were switched to the opposite side in the same location. now the filler is on the left.
-
1 Attachment(s)
another view of radiator:
-
1 Attachment(s)
-
1 Attachment(s)
-
1 Attachment(s)
the ESR TRX-6 pipe. needs rechromed. the mid pipe will need an inch section cut out and rewelded to clear the inner tie-rod end.
-
1 Attachment(s)
zoom. the pic may be decieving but there is no interference issues with the a-arms throughout the travel.
-
1 Attachment(s)
closer pic of left side motor mount: