whats the proper way to do a plug check so you can get a very accurate reading of how your jetting is? what do you guys do?
Printable View
whats the proper way to do a plug check so you can get a very accurate reading of how your jetting is? what do you guys do?
main jet pin it for about 10 seconds going through the gears normally, pull the clutch and hit the kill switch, the let it roll to a stop and immediately check the plug....
for the needle jet hold the throttle half way the same amount of time with a different plug(preferably)
fort eh pilot very little throttle about 1/8 and repeat again preferably with a another new plug