-
need help with eton 90
i have a eton thunder 90 atv. i am not getting any fire to the plug. i checked the key switch, the kill switch. I changed the spark plug, coil, stator generator, and the cdi box. I checked for broke wires. I dont know what else to do? Is there a wrong way to replace the stator/generator? Please help. thank you
-
-
do you know which ground it might be? the starter turns the motor over. i found a ground wire that looks to be cut off by the starter relay but there is no sign of it ever being hooked up before.
does anyone have a wire diagram for this bike.
-
Have one for the Eton Viper.
-
Does the Eton have a tether type kill switch. ON my son's Predator 90, I spent two days trying to determine why I was not getting a spark. It ended up being a bad tether switch. I unplugged the two and taped them together, then I got spark. I ordered a new one but wish I would have went with a Pro Design. Hope this helps....
-
when i put the ohm meter on it it checks good. maybe i should bypass it and try it that way just to see.
-
Let us know what you find when you try to bypass it...
-
I am having the same problem!
Did you figure anything out?
-
no, it still dont fire. i have changed the coil, cdi box, stator generator, spark plug, checked all my switches and i checked all my grounds that i could find. so i am stumped. i think i am going to sell it for parts.
-
Hooked mine up to an ohm meter today and found out the new stator I received was defective.