16T Front Sprocket?

[Quadzilla]

Will it (16T vs the stock 15T) work on the 400EX with stock cover, etc? Thanks!

[atvracr350]

i am pretty sure the 16 tooth sprocket will not work with the stock cover, that is just what i have heard.

[H_W]

Originally posted by Quadzilla
Will it (16T vs the stock 15T) work on the 400EX with stock cover, etc? Thanks!

I have a 16 tooth sprocket and when I had it on my 400 the stock case saver would not fit. The sprocket cover will fit, however.

[cals400ex]

you just have to grind alittle off the case saver and it works fine then.

[Quadzilla]

:p

[Toadz400]

You can also order an aftermarket case saver, I know there is at least one company that makes a case saver compatible with a 16t front sprocket. The company that makes them is Pro Design, from Dennis Kirk they are $32.

[ewalker302]

I just used a dremel tool to grind a little off of the stock saver to make mine fit, took about 15 min.

:bandit:

[Silverfox@C&DRacing]

I didn't try the grinding part be I did put on a Magnum case savor for $24