Hetrick Racing

[hetrick425ex]

Hey just wanted to let everyone know that we will be looking at the site more often,if we can do anything to help anybody,please ask.

[Pappy]

A big thanks for Hetricks help in getting our mini up to speed:D

[jst]

wHEN WILL THE ETON 90CC PIPES BE READY?

[robjohn74]

is there anything for e-ton 40cc

[hetrick425ex]

The guys are not happy with the Eton pipe yet,so I cant say.
The 40cc is very hard to mod and there are no real bolt ons that can be done,sorry to tell ya that.

[QuadJunkies]

Originally posted by hetrick425ex
The guys are not happy with the Eton pipe yet,so I cant say.
The 40cc is very hard to mod and there are no real bolt ons that can be done,sorry to tell ya that. Casye~~ You guys have any dampeners in for my EX???(Denton)Michelle said maybe you would get some today???Also, you got a Pm......:D

[rupezx]

hey 426ex , i waz just up at your shop a few weeks ago with my sons DRR90 . the qaud is running strong with the pipe and clutch springs. my ?? to you , if you could help is .... my son is now whining it out on the straights and the starting line . i waz going to change sprockets. what gearing would you recomand for it . he also does woods with me , so i would like to keep a little low end with a little more top end for the starts . any help would be great . and you guys do good work . MY SON LOVES HIS PIPE!!!

[PHAT400]

Great site man. I'll be getting with you guy's soon to upgrade my boy's scrambler 50.

[jst]

I received the pipe monday for our Eton,Holy **** is this thing badazz!!I had surgery friday and its killing me not to put the thing on.I have a question.First the specs:
2003 Eton Viper 90cc
Hetrick port/polish
Hetrich head mod
Hetrick 20mm carb kit
Malossi red rear springs
Malossi torque spring
4.5 g rollers I think
Hetrick pipe/silencer
no airbox/oil injection/battery box
fresh crank bearings

JETTING THE CARB-
Pilot--???
Main--???
Needle clip pos.--???

Fuel 110 Sunoco w/Bel Ray @ 32 to 1
Thanks,Jon

[hetrick425ex]

It should be close but check it,125 main to start.58 pilot, needle in the middle

[dalyz250f]

Casey, I have installed the Power Up Kit C on the formerly "Maxfine 100" now "Hetrick Racing 100". Had to remove the oil tank and the battery but the thing starts easy and idles better now, not to mention it lost a couple of pounds. Anyway I did the clutch drilling for higher stall speeds and this little quad runs really good now. Thanks for all your help on the phone. Brad Hall