PDA

View Full Version : Jetting specs, is your setup like mine? Loooking for a baseline



redroost85
03-26-2004, 04:38 PM
Ok the long short of this story comes a need to truly rejet my 400...not just the main jet. I am switching to a Uni with the lid on this time...as opposed to running the K&N with the lid off.

Right now I have a 165 main, and the stock pilot 38(?) I am at sea level. I have a full Yoshi pipe and the motor is stock.

Does anyone have a baseline or just a place to start thinking about mains, pilot, mixture screw, needle, etc.....:o

I will just be using stock Keihin jets too.

Any help is greatly appreciated.:( :)

redroost85
03-26-2004, 07:51 PM
Bump. Just a lil help guys.:o :)

cals400ex
03-27-2004, 01:22 AM
155 keihin mainjet
needle in 3rd position in summer and 4th position in winter
40 or 42 pilot jet
fuel skrew 2 turns out

redroost85
03-28-2004, 03:05 PM
You're the man Cal.:) Thanks for saving me some butt scratching time, lol!;)

cals400ex
03-28-2004, 03:41 PM
this is just a starting point. if it isn't running to its potential, let us know and we can do some fine tuning. however, you bike should run great with this jetting setup. good luck