tie rods?

[WhiteBros400ex]

I took my a arms and tie rods off and i just got them back on to ride for a little before my new arms and shocks come, and when i push down on the shocks the tires like bend in? what did i do wrong? can i get some help thanks:)

[WhiteBros400ex]

sorry about both post? must have hit it twice:D

[SnellCRP]

If the tires turn in when you compress the suspension then what you are seeing is bumpsteer. If the tops of the tires are leaning in when the suspension is compressed then you may have too much positive camber and you will need to adjust the balljoints or heims so they push the top of the tire out when the suspension is fully compressed. I usually set mine to 1/4-3/8" positive camber at ride height. Hope this helps. ;)