powder coating a-arms

[exriderdude]

if i wanted to powder coat my a-arms, what all would i have to do. like bearings, bushings etc.

[CBW]

are they stock a arms.....if so you would have to send them to beerock to have removeable balljoints but in them.....if they already have removable ball joints....take them out and all the bushings out and send them to the powdercoaters and they will strip them and prep them for powdercoating..........then send them back to you.

[TRFOXX]

If they are stock I wouldnt have them done. I had to buy new ones after 6 months after they were powdercoated. The ball bearings were shot. If you have removeable ball joints then go ahead it dose look nice when finished.