PDA

View Full Version : What to look for in a 250R



daiglea
03-24-2004, 05:22 AM
I am going to go look at a 250R tonight and i am just wondering what to watch out for. Thing i should look for and stuff. Just don't want to get screwd.

beak7707
03-24-2004, 07:02 AM
250R's are some great bikes, but you have to realize they are old. So just from looking you able able to tell if its been completely ragged. But look at the left case and make sure its not busted and leaking everywhere. Check all the bushing and bearings, shake the front end and rear end. You can put a lot of money in bearings, bushings, and seals. So if you can find one that doesn't need them that a big plus. The 250r frame was good but it cracks the same as all other ATVs, so check for cracks. I have seen a few cracked by the foot pegs. ALso any aftermarket parts it may have will be a plus. If it looks good and runs good I would get it, I love my 250R and am very happy I got it. I'm not even interested in the 450's at the time, long live the 250R!!

daiglea
03-24-2004, 07:18 AM
Anywere else i should be looking for cracks on the frame.

hsr
03-24-2004, 08:49 AM
In the front shock mount area

cdalejef
03-24-2004, 09:20 AM
Look the frame over completly. There is about 9 places that the frame will crack. Becarefull there is alot of junk 250R's out there.

daiglea
03-24-2004, 09:55 AM
Is there any preference on the year. Wich year is liquide cooled?

sly400ex
03-24-2004, 10:03 AM
They're all liquid cooled. ALL years are good, but 88-89 seem to be the preference, mainly due to the frame geometry(location of a-arms and swingarm). But like I said, all years are awesome!:D

nateftbl
03-24-2004, 11:41 AM
look at the motor mounts on the frame and see if they are cracked. long live the R is right!!!!!