PDA

View Full Version : 2 complete rollers and 3 motors 250r


smooth
03-21-2004, 06:45 AM
i have a lonestar 2001 roller for 3000

and also have a 86 stock roller for 1400


i will part these out if the price you offer is right for the stuff you want

have roll chrome +2 arms

yellow fullbore

leager +2+1 a-arms

-2 jp swingarm 88-89

nerf bars 86

stock axles straight 400ex and a 250r

new itp tires

fmf exhaust

curtis sparks tt pipe chrome

and much more just ask

motors are 250 and 350cc

86 250r motor bored first size over not even broken in yet not even fired

88 thats the same way just is bored .40 over

and yes a k&t motorsports 350cc motor just built and one tank of gas ran through it the bottom end was brand new last year with the stock r cylinder and i decided to up grade a little now funds are tight and i need to sell this stuff
beak7707
03-21-2004, 09:13 AM
any pics of the yellow fullbore, how much?
jeffro88
03-21-2004, 10:11 AM
I have a friend looking for a LS bike......could you please describe the LS bike in detail and exactly what's missing. And what part of PA are you from??
LMK....
Thanks,Jeff
jrspawn
03-21-2004, 02:39 PM
Hey, please email me at jrspawn@aol.com with a full list of everything on the ls roller, is it a lond travel setup? And also how much you would want for everything. thank you.

justin
jrspawn@aol.com
smooth
03-21-2004, 05:41 PM
the lsr frame is sold the only thing left is the parts listed and the 86 roller whats your e-mail for the pic on the fullbore
steveatv3
03-21-2004, 05:54 PM
do you have an R engin that u would be willing to sell?

if so how much
smooth
03-21-2004, 06:12 PM
i have 3 ones a 350cc 1500

other is a 88 just had fresh bore and piston kit 700

other is a 86 with fresh bore an piston 700
smooth
03-21-2004, 08:34 PM
bump
smooth
03-22-2004, 05:12 AM
bump
swamprider7
03-22-2004, 06:47 AM
How much for your leager +2+1 a-arms? Do they include tie rods? Are the bushings and ballljoints all tight?
smooth
03-22-2004, 02:50 PM
yes they have tierods and the joints are tight and the price 375
smooth
03-23-2004, 06:04 AM
bump
smooth
03-23-2004, 08:10 PM
bump
TRX450rRoostin
03-24-2004, 08:34 PM
can you send me pics of the roller you have left....the stock one....thanks rafalzd@hotmail.com
Hotdog
03-25-2004, 07:21 AM
where are you located? i am interested in the 86 roller
C41Xracer
03-25-2004, 09:18 AM
sent you a pm
guamr
03-25-2004, 09:26 AM
I got 300 for a set of arms right now! Ill take either of the +2s. Let me know. email me and ill give you my number seacruz@cisco.com
C41Xracer
03-25-2004, 03:23 PM
sent you a pm
smooth
03-25-2004, 06:40 PM
i will send pics tomorrow of the roller i need 375 for the leagers i'm located 1/2 south of lost creek cycles in blain pa right below port royal
Hotdog
03-26-2004, 05:28 AM
please sent pics of thge roller to dfreeman@brockwaypm.com

thanks
ryanh250ex
03-26-2004, 05:39 AM
do you have any pics of the 86 motor that was just recently rebuilt and bored the first size over? i am interested.

does it come with a carb, electronics, etc etc?

if you have any pics of it, please send them to rh027@aol.com
swamprider7
03-29-2004, 02:06 PM
are the nerf bars aluminum? what brand, condition, price?
smooth
03-29-2004, 02:44 PM
the nerfs are old style that have the pop rivots holding the nets on
ryanh250ex
03-30-2004, 05:32 AM
i'll ask again......


Originally posted by ryanh250ex
do you have any pics of the 86 motor that was just recently rebuilt and bored the first size over? i am interested.

does it come with a carb, electronics, etc etc?

if you have any pics of it, please send them to rh027@aol.com
smooth
03-30-2004, 03:26 PM
it's sold the only ones i have left are 2 88 motors